Two-link flexible manipulator modelling and tip trajectory tracking based on the absolute nodal coordinate method

被引：0
|
作者：
Tian, Q. [1 ]
Zhang, Y.-Q. [1 ]
Chen, L.-P. [1 ]
Yang, J. [2 ]
机构：
[1] Center for Computer-Aided Design, School of Mechanical Science and Engineering, Huazhong University of Science and Technology, Wuhan, Hubei, China
[2] Department of Mechanical Engineering, Texas Tech University, Lubbock, TX, United States
来源：
International Journal of Robotics and Automation | 2009年 / 24卷 / 02期
关键词：
A new dynamic modelling technique for a two-link flexible manipulator based on the absolute nodal coordinate method is firstly investigated. The manipulator flexible links are discretized by ID beam elements based on the absolute nodal formulation; and the shear deformations are neglected. The equations of motion with constant system mass matrix for a two-link flexible manipulator are deducted; and the corresponding integration method with high efficiency is also introduced. The proposed modelling method is validated through the two-link flexible manipulator tip circle and square trajectory tracking control simulations by using a PID controller. The results obtained by using the model based on the absolute nodal coordinate formulation are also compared to those obtained by using the assumed mode method. The simulation results indicate that modelling and controlling the flexible manipulator based on the absolute nodal coordinate formulation is effective;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Journal article (JA)
引用
收藏
页码：103 / 114
相关论文
共 50 条
  • [1] TWO-LINK FLEXIBLE MANIPULATOR MODELLING AND TIP TRAJECTORY TRACKING BASED ON THE ABSOLUTE NODAL COORDINATE METHOD
    Tian, Q.
    Zhang, Y. -Q.
    Chen, L. -P.
    Yang, J.
    INTERNATIONAL JOURNAL OF ROBOTICS & AUTOMATION, 2009, 24 (02): : 103 - 114
  • [2] Observer Based Tip Tracking Control of Two-Link Flexible Manipulator
    Masoud, Mosayebi
    Mostafa, Ghayour
    Mostafa, Shariati Nia
    INTERNATIONAL CONFERENCE ON CONTROL, AUTOMATION AND SYSTEMS (ICCAS 2010), 2010, : 9 - 13
  • [3] Dynamic model and tip trajectory tracking control for a two-link flexible robotic manipulator
    Wang, DL
    Lu, YF
    Liu, Y
    Li, XG
    INFORMATION INTELLIGENCE AND SYSTEMS, VOLS 1-4, 1996, : 1020 - 1024
  • [4] Experimental study for trajectory tracking of a two-link flexible manipulator
    Li, YC
    Tang, BJ
    Shi, ZX
    Lu, YF
    INTERNATIONAL JOURNAL OF SYSTEMS SCIENCE, 2000, 31 (01) : 3 - 9
  • [5] Robust control for trajectory tracking of a two-link flexible manipulator
    Li, Yuanchun
    Lu, Youfang
    Tang, Baojian
    Zidonghua Xuebao/Acta Automatica Sinica, 1999, 25 (03): : 330 - 336
  • [6] Dynamic Analysis of Two-Link Flexible Manipulators Based on the Absolute Nodal Coordinate Formulation
    Zhao J.
    Yu H.
    1600, Shanghai Jiaotong University (51): : 1160 - 1165
  • [7] Command shaped trajectory tracking control for a two-link flexible manipulator
    Kumar, Sandeep
    Saha, Subir Kumar
    Singla, Ashish
    Singh, Satinder Paul
    Bera, Tarun Kumar
    MULTIBODY SYSTEM DYNAMICS, 2024, 60 (04) : 581 - 597
  • [8] A Robust Trajectory Tracking Control Scheme of Two-link Flexible Manipulator
    Lu, Jingshuang
    Du, Chunmei
    RuiZhou
    Li, Na
    MECHATRONICS AND MATERIALS PROCESSING I, PTS 1-3, 2011, 328-330 : 2108 - +
  • [9] Command shaped trajectory tracking control for a two-link flexible manipulator
    Sandeep Kumar
    Subir Kumar Saha
    Ashish Singla
    Satinder Paul Singh
    Tarun Kumar Bera
    Multibody System Dynamics, 2024, 60 : 581 - 597
  • [10] Trajectory optimization for a two-link flexible manipulator
    Technical Univ of Nova Scotia, Halifax, Canada
    Int J Rob Autom, 2 (56-61):
12345