Preparation of Aqueous Graphene Oxide/Epoxy Resin Composite Emulsion and Its Anticorrosivity

被引:0
|
作者
Yuan C. [1 ,2 ]
Tong X. [1 ]
Wang X. [1 ]
Zhang X. [1 ]
Su J. [1 ]
Yao F. [1 ,2 ]
Guo R. [1 ,2 ]
An Y. [2 ]
机构
[1] School of Chemical Engineering and Technology, Tianjin University, Tianjin
[2] Tianjin University-UCGM Joint Research Center for Graphene Application, Tianjin
关键词
Anticorrosion; Epoxy resin; Graphene oxide; Waterborne coating;
D O I
10.11784/tdxbz201911009
中图分类号
学科分类号
摘要
In this study, we prepared a stable aqueous graphene-oxide modified-epoxy-resin(GO/EP)composite emulsion using the phase transformation method. Given the large amount of oxygen-containing functional groups on its surface, GO was easily and uniformly dispersed in the EP emulsion. In addition, the sheet structure of GO inhibits corrosion by blocking the corrosive medium to the interior of the coating. The results of stability and water absorption tests indicated that the storage stability of the prepared GO/EP composite emulsion was longer than one year, and the water adsorbed by the cured film was reduced to 6% compared to the 11% reduction of the unmodified film. The GO/EP composite film exhibited good adhesion to stainless steel, reaching the ASTM 5B(ISO 0)level. Moreover, the electrochemical test results revealed that the equivalent resistance of the GO/EP composite film increased markedly, capacitance reduced by 44%, annual corrosion rate reduced by 92%, and the protection efficiency was close to 99%. Based on these results, the prepared GO/EP composite emulsion shows great potential for use in aqueous anticorrosive paints. © 2020, Editorial Board of Journal of Tianjin University(Science and Technology). All right reserved.
引用
收藏
页码:1314 / 1320
页数:6
相关论文
共 19 条
  • [1] Rui Jianling, Preparation and Properties of Waterborne Epoxy Metal Anticorrosive Coatings, (2018)
  • [2] Liu Min, Mao Xuhui, Zhu Hua, Et al., Water and corrosion resistance of epoxy-acrylic-amine waterborne coatings: Effects of resin molecular weight, polar group and hydrophobic segment, Corrosion Science, 75, 5, pp. 106-113, (2013)
  • [3] Shao Zhubao, Zhang Mingxin, Li Ying, Et al., A novel multi-functional polymeric curing agent: Synthesis, characterization, and its epoxy resin with simultaneous excellent flame retardance and transparency, Chemical Engineering Journal, 345, 6, pp. 471-482, (2018)
  • [4] Wu Yue, Song Ningning, Wang Wucong, Synthesis of graphene/epoxy resin composite via 1, 8-diaminooctane by ultrasonication ap-proach for corrosion protection, Ultrasonics-Sonochemistry, 42, 6, pp. 464-470, (2018)
  • [5] Wang Na, Gao Huiying, Zhang Jing, Et al., Preparation and corrosion resistance of modified oxide composite coating of graphene oxide, Fine Chemical, 36, 7, pp. 1476-1482, (2019)
  • [6] Tang Erjun, Yao Mengmeng, Du Pengya, Et al., Synthesis and dynamic mechanical study of core-shell structure epoxy/polyacrylate composite particle, Journal of Polymer Research, 23, 9, (2016)
  • [7] David R, Raja V S, Singh S K, Et al., Development of anti-corrosive paint with improved toughness using carboxyl terminated modified epoxy resin, Progress in Organic Coatings, 120, pp. 58-70, (2018)
  • [8] Jiang Fengwei, Zhao Wenjie, Wu Yangmin, Et al., Anti-corrosion behaviors of epoxy composite coatings enhanced via graphene oxide with different aspect ratios, Progress in Organic Coatings, 127, 11, pp. 70-79, (2019)
  • [9] Zou Jing, Preparation and properties of graphene oxide modified waterborne epoxy anticorrosive coatings, Chemical Engineer, 33, 2, pp. 1-4, (2019)
  • [10] Yuan Caideng, Zhao Meng, Sun Da, Et al., Preparation and properties of few-layer graphene modified waterborne epoxy coatings, Journal of Applied Polymer Science, 135, 41, (2018)