Study on austenite stainless steel single arc welding of austenite stainless steel twin electrode

被引：0
|
作者：
Dept. of Material Science and Engineer, Shandong Jianzhu University, Jinan 250101, China [1 ]
不详 [2 ]
机构：
来源：
Cailiao Kexue yu Gongyi | 2007年 / 4卷 / 560-563期
关键词：
Austenitic stainless steel - Electric arc welding - Electric currents - Electric potential - Thermocouples;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
The influence of static characteristic, welding current, arc voltage and core wires gap of single arc welding of austenite stainless steel twin electrode on technological performances and appearance of welding were investigated. The surface temperature of different locations of core wires was tested by means of thermocouple. The result shows that the technology is feasible for material of 1Cr18Ni9Ti and the good formation of weld can be obtained under the condition of diameter of the twin A102 electrode φ 4.0 mm, gap of two cords 1.2-1.5 mm, welding current 140-160 A, arc voltage about 45V.
引用
收藏
相关论文
共 50 条
  • [21] Misorientation between austenite and σ -Phase in duplex stainless steel
    Berecz, Tibor
    Szabó, Péter J.
    Periodica Polytechnica Mechanical Engineering, 2005, 49 (02): : 123 - 130
  • [22] The strain hardening behavior of metastable austenite stainless steel
    Zhang, WF
    Chen, YM
    Zhu, JH
    RARE METAL MATERIALS AND ENGINEERING, 2002, 31 (01) : 22 - 24
  • [23] Strain hardening behavior of metastable austenite stainless steel
    Zhang, Wangfeng
    Chen, Yumei
    Zhu, Jinhua
    Xiyou Jinshu Cailiao Yu Gongcheng/Rare Metal Materials and Engineering, 2002, 31 (01):
  • [24] Formation and stabilization of reverted austenite in supermartensitic stainless steel
    Niessen, Frank
    Grumsen, Flemming Bjerg
    Hald, John
    Somers, Marcel Adrianius Johannes
    METALLURGICAL RESEARCH & TECHNOLOGY, 2018, 115 (04)
  • [25] AUSTENITE-MARTENSITE INTERFACE DISLOCATIONS IN STAINLESS STEEL
    KOEPKE, BG
    JEWETT, RP
    CHANDLER, WT
    NATURE, 1966, 210 (5042) : 1252 - &
  • [26] Technology for production of austenite type clean stainless steel
    Sakata, Kimiaki
    ISIJ INTERNATIONAL, 2006, 46 (12) : 1795 - 1799
  • [27] PRECIPITATION OF AUSTENITE AT DEFORMATION TWIN BOUNDARIES OF FERRITE IN 2 PHASE STAINLESS-STEEL
    AMEYAMA, K
    MAKI, T
    SCRIPTA METALLURGICA ET MATERIALIA, 1990, 24 (01): : 173 - 178
  • [28] DYNAMIC RECRYSTALLIZATION IN STAINLESS-STEEL OF FERRITE, AUSTENITE AND AUSTENITE-FERRITE TYPES
    ZARIPOVA, RG
    KAYBYSHEV, OA
    SALISHCHEV, GA
    FIZIKA METALLOV I METALLOVEDENIE, 1992, (04): : 132 - 141
  • [29] AUSTENITE STABILITY OF STAINLESS STEEL AT CRYOGENIC TEMPERATURES (LOW TEMPERATURE STRENGTH OF AUSTENITIC STAINLESS STEEL - III).
    Sakamoto, Tetsu
    Nakagawa, Yasuhiro
    Yamauchi, Isamu
    Zaizen, Takashi
    1600, (24):
  • [30] Dissimilar metal welding of Austenite stainless steel and carbon steel using Nd: YAG laser a continuous wave
    Shin, Ho Jun
    Yoo, Young Tae
    Shin, Byung Heon
    Kim, Ji Hwan
    MECHANICAL BEHAVIOR OF MATERIALS X, PTS 1AND 2, 2007, 345-346 : 1445 - +
12345