Study on austenite stainless steel single arc welding of austenite stainless steel twin electrode

被引：0

作者：

Dept. of Material Science and Engineer, Shandong Jianzhu University, Jinan 250101, China ^{[1
]}

不详 ^{[2
]}

机构：

来源：

Cailiao Kexue yu Gongyi | 2007年 / 4卷 / 560-563期

关键词：

Austenitic stainless steel - Electric arc welding - Electric currents - Electric potential - Thermocouples;

D O I：

暂无

中图分类号：

学科分类号：

摘要：

The influence of static characteristic, welding current, arc voltage and core wires gap of single arc welding of austenite stainless steel twin electrode on technological performances and appearance of welding were investigated. The surface temperature of different locations of core wires was tested by means of thermocouple. The result shows that the technology is feasible for material of 1Cr18Ni9Ti and the good formation of weld can be obtained under the condition of diameter of the twin A102 electrode φ 4.0 mm, gap of two cords 1.2-1.5 mm, welding current 140-160 A, arc voltage about 45V.

引用