RESEARCH ON THE EFFECTS OF ROLLER-SPREADING PARAMETERS FOR NYLON POWDER SPREADABILITY IN ADDITIVE MANUFACTURING

被引：0

作者：

Zhang J. ^{[1
]}

Tan Y. ^{[1
]}

Ji C. ^{[1
]}

Xiao X. ^{[2
]}

Jiang S. ^{[2
]}

机构：

[1] Institute of Manufacturing Engineering, Huaqiao University, Xiamen

[2] School of Mechanical Engineering, Xiangtan University, Xiangtan

来源：

| 1600年 / Chinese Society of Theoretical and Applied Mechanics卷 / 53期

关键词：

Additive manufacturing; DEM; Parameters optimization; Powder spreadability; RSM;

D O I：

10.6052/0459-1879-21-240

中图分类号：

学科分类号：

摘要：

The powder spreading process is one of the key processes in the powder-bed-based additive manufacturing (AM) technology. The roller-spreading parameters include the powder spreading layer thickness H, roller's diameter D, roller's rotational speed ω and translational velocity V, which have a major impact on the powder spreadability in AM processes. In this paper, the nylon powder was taken as the research object, and the discrete element method (DEM) was deployed to simulate the nylon powder spreading process by a roller. The three powder spreadability indicators including the deposition fraction, percent coverage and deposition rate were established. The central composite design (CCD) model was used to generate 30 groups of simulation cases. The regression models of three powder spreadability indicators were fitted by the response surface method (RSM). The analysis of variance was used to prove the accuracy and predicting effectiveness of regression models. In addition, the effect of process parameters on powder spreadability indicators was analyzed in detail. The results showed that the powder spreading layer thickness H was a leading influencing factor. The roller's translational velocity V was a less important influencing factor. The roller's diameter D and rotational speed ω had a slight influence on powder spreadability indicators. Both the H and D with V were determined as the main interactive factors on powder spreadability indicators. The three powder spreadability indicators were taken as the optimization goal, and the multi-objective optimization of roller-spreading parameters was carried out by the expectation method. The predicted optimal combination of powder spreading parameters and powder spreadability indicators were obtained. Moreover, the optimal results were verified through the experiments. The results showed that the predicted results of powder spreadability indicators were in good agreement with experimental results. The research results in this paper can provide guidance for the optimization of roller-spreading parameters in AM. © 2021, Chinese Journal of Theoretical and Applied Mechanics Press. All right reserved.

引用

页码：2416 / 2426

页数：10

共 37 条

[1]

Lu Bingheng, Additive manufacturing-current situation and future, China Mechanical Engineering, 31, 1, pp. 19-23, (2020)

[2]

Li Ran, Liu Shutian, Robust topology optimization of structures considering the uncertainty of surface layer thickness, Chinese Joumal of Theoretical and Applied Mechanics, 53, 3, pp. 1471-1479, (2021)

[3]

Zhang J, Tan Y, Bao T, Et al., Discrete element smulation of the effect of roller-spreading parameters on powder-bed density in additive manufacturing, Materials, 13, 10, (2020)

[4]

Nan W, Pasha M, Bonakdar T, Et al., Jamming during particle spreading in additive manufacturing, Powder Technology, 338, pp. 253-262, (2018)

[5]

Nan W, Pasha M, Ghadiri M., Numerical simulation of particle flow and segregation during roller spreading process in additive manufacturing, Powder Technology, 364, pp. 811-821, (2020)

[6]

Wang Chao, Xu Bin, Duan Zunyi, Et al., Additive manufacturing-oriented stress minimization topology optimization with connectivity, Chinese Journal of Theoretical and Applied Mechanics, 53, 4, pp. 1070-1080, (2021)

[7]

Michael VDE, Verbelen L, Puyvelde PV., Assessing polymer powder flow for the application of laser sintering, Powder Technology, 286, pp. 151-155, (2015)

[8]

Spierings AB, Voegtlin M, Bauer T, Et al., Powder flowability characterisation methodology for powder-bed-based metal additive manufacturing, Progress in Additive Manufacturing, 1, pp. 9-20, (2016)

[9]

Al-Hashemi HMB, Al-Amoudi OSB., A review on the angle of repose of granular materials, Powder Technology, 330, pp. 397-417, (2018)

[10]

Vlachos N, Chang ITH., Investigation of flow properties of metal powders from narrow particle size distribution to polydisperse mixtures through an improved hall-flowmeter, Powder Technology, 205, pp. 71-80, (2011)

← 1 2 3 4 →