Zero-valent iron on graphite-cellulose biochar catalysts for the Fenton degradation of tetracycline from water

Tetracycline (TC), an antibiotic widely used in the treatment of animal and human diseases and promotion of animal growth. However, its uncontrolled discharge to water sources can also cause the promotion of antibiotic resistant bacteria and genes. In this study, graphite and cellulose were used as raw materials to construct a graphite-biochar (G-BC) by carbothermal reactions. This graphite-biochar was subsequently mixed with ZVI with various mass ratios by ball milling to produce graphite-biochars supported ZVI (ZVI/G-BC) catalysts, further used in the heterogeneous Fenton degradation of tetracycline. The materials were fully characterized by different techniques. The removal of TC by BC, G-BC and ZVI/G-BC was tested under different reaction conditions. The best synthesis conditions were achieved at a heating temperature of 700 degrees C, a graphite content of 20 %, a ball milling speed of 500 rpm, a ball milling time of 5 h, as well as a G-BC and ZVI mass ratio of 1:3. Graphite improves the conductivity and micropore area of the material, which enhances the removal of TC by ZVI/G-BC catalysts in Fenton-like reactions. TC was first oxidized to intermediate products and then further mineralized to CO2 and H2O. The best TC removal performance was obtained with a catalyst dosage of 1.1 g center dot L-1, a hydrogen peroxide concentration of 140 mM and an initial pH value of 3. The reaction data fitted properly a pseudo firstorder kinetic equation. TC removal as high as 91 % was achieved even in the 3rd round of reuse. This study reports a novel ZVI material with high conductivity and good TC removal performance.