Study on off-line programming of industrial robot for cutting process

被引：3

作者：

Liu C.-H. ^{[1
,2
]}

Yao B.-G. ^{[1
]}

Ke Y.-L. ^{[1
]}

机构：

[1] Department of Mechanical Engineering, Zhejiang University

[2] Department of Mechanical Engineering, Jiaxing College

来源：

Zhejiang Daxue Xuebao(Gongxue Ban)/Journal of Zhejiang University (Engineering Science) | 2010年 / 44卷 / 03期

关键词：

Cutter location file; Industrial robot; Light cut; Off-line programming;

D O I：

10.3785/j.issn.1008-973X.2010.03.003

中图分类号：

学科分类号：

摘要：

An off-line programming method and relevant parameter resolution process were proposed to economically enhance the efficiency of industrial robot which used for light cutting of aerospace aluminum alloy during digital airplane assembly. Based on automatic programming tool(APT) cutter location source files and interface programs, the cutter location data from CAD/CAM system were integrated into the robot programming system. According to robot control requirements, cutter location information was transformed into the move path of end effecter and the robot program by post processing. Finally a kinetic emulation module was used to validate the robot program. The results of example showed that this method is effective for control program generation of complex workpiece light cutting process using industrial robot, and the programming efficiency is significantly improved compared with the teaching programming method.

引用

页码：426 / 431+439

共 15 条

[1]

Bruce M., Robotics seeks its role in aerospace, Manufacturing Engineering, 139, 4, (2007)

[2]

Lin G., Lu T.-F., Yin Y.-S., The development of a dual robot machining system for rapid prototyping, Journal of Industrial Engineering, 5, pp. 16-19, (1998)

[3]

Shirase K., Tanabe N., Hirao M., Et al., End milling for articulated robot application: 3rd report, Improvement of machining accuracy by robot calibration, Transactions of the Japan Society of Mechanical Engineers, 61, 581, pp. 259-265, (1995)

[4]

Tomas O., Anders R., Rolf J., Flexible force control for accurate low-cost robot drilling, Proc of IEEE International Conference on Robotics and Automation, pp. 4770-4775, (2007)

[5]

Shimizu K., Shinichi M., Yamazaki N., Et al., High-speed cutting for extruded aluminum alloys using robot, Journal of Japan Institute of Light Metals, 48, 12, pp. 603-607, (1998)

[6]

Shinichi M., Shimizu K., Yamazaki N., Et al., High-speed end milling of an articulated robot and its characteristics, Journal of Materials Processing Technology, 95, 13, pp. 8-89, (1999)

[7]

Nehmzow U., Akanyeti O., Christoph W., Et al., Robot programming by demonstration through system identification, Proc of 2007 IEEE/RSJ International Conference on Intelligent Robots and Systems, pp. 801-806, (2007)

[8]

Maria G., The future of robot programming, Robotica, 5, 3, pp. 23-246, (1987)

[9]

Johnson C.G., Marsh D., A robot programming environment based on free-form CAD modeling, Proc of 1998 IEEE International Conference on Robotics and Automation, 1, pp. 194-199, (1998)

[10]

Fu Y.-L., Zhao C.-X., Wang S.-G., Et al., An industrial robot simulation and off-line programming system based on 3D dynamic graphic, China Mechanical Engineering, 7, 1, pp. 21-25, (1996)

← 1 2 →