3D shape measurement method based on new system mathematic model

被引：0

作者：

Qu, Xuejun ^{[1
]}

Song, Yuewen ^{[1
]}

Wang, Yong ^{[1
]}

Han, Zhiren ^{[1
]}

Zhang, Lingyun ^{[1
]}

机构：

[1] School of Astronautics, Shenyang Aerospace University

来源：

Jixie Gongcheng Xuebao/Journal of Mechanical Engineering | 2012年 / 48卷 / 14期

关键词：

3D reconstruction; Lens distortion; Phase measurement profilometry (PMP); System calibration;

D O I：

10.3901/JME.2012.14.017

中图分类号：

学科分类号：

摘要：

A new measurement model is proposed to solve this problem, in which the projector light field is regarded as the space swept by projection planes marked by their phase values, and the camera model is regarded as the collection of rays marked by their image coordinates, then the point on the measured part can be determined as the intersection point of corresponding projection plane and the image ray. Based on above analysis, the reverse method for solving the mathematic model of the projector is proposed, which has the benefit of avoiding calibrating projector explicitly. The radical and tangential lens distortion coefficients of the camera are solved by two separately separate steps, and then the camera model can be set up according to the pinhole image model. Enough calibration foundation data is collected by the planar target free location method, so the location and size of the target is no longer been restricted strictly, and the complete calibration result can still be fulfilled while the calibration data is not cover the entire view space. Benefits of our calibration method are that strict construction assembly requirement and accurate displacement device are no longer being needed, and the calibration error caused by lens distortion of both the projector and the camera can be eliminated effectively. © 2012 Journal of Mechanical Engineering.

引用

页码：17 / 24

页数：7

共 14 条

[1]

Wu Y., Hu X., Dai Y., Et al., In-situ surface measurement for large aperture optical mirror based on phase retrieval technology, Journal of Mechanical Engineering, 45, 2, pp. 157-163, (2009)

[2]

Ayubi G.A., Martino J.M.D., Alonso J.R., Et al., Three-dimensional profiling with binary fringes using phase-shifting interferometry algorithms, Applied Optics, 50, 2, pp. 147-154, (2011)

[3]

Zhang S., Yau S.T., Generic nonsinusoidal phase error correction for three-dimensional shape measurement using a digital video projector, Applied Optics, 46, 1, pp. 36-43, (2007)

[4]

Hu Q., Huang P., Fu Q., Et al., Calibration of a three-dimensional shape measurement system, Optical Engineering, 42, 2, pp. 487-493, (2003)

[5]

Su X., Zhang Q., Xiang L., Optical 3D shape measurement for dynamic process, Optoelectronics Letters, 4, 1, pp. 55-58, (2008)

[6]

Tian A.L., Tomoaki M., Mitsuo T., Et al., Profile measurement of objects with discontinuous surfaces by modified temporal phase unwrapping, Proceedings of SPIE, 5633, pp. 23-30, (2005)

[7]

Sitnik R., New method of structure light measurement system calibration based on adaptive and effective evaluation of 3D-phase distribution, Proceedings of SPIE, 5856, pp. 109-117, (2005)

[8]

Ha T., Takaya Y., Miyoshi T., Et al., High-procision on-machine 3D shape measurement using hypersurface calibration method, Proceedings of SPIE, 5603, pp. 40-50, (2004)

[9]

Zhu S., Gao Y., Noncontact 3-D coordinate measurement of cross-cutting feature points on the surface of a large-scale workpiece based on the machine vision method, IEEE Transactions on Instrumentation and Measurement, 59, 7, pp. 1874-1887, (2010)

[10]

Sansoni G., Docchio F., 3D optical measurements in the field of cultural heritage: The case of the vittoria alata of Brescia, IEEE Transactions on Instrumentation and Measurement, 54, 1, pp. 359-368, (2005)

← 1 2 →