Thermal optimized design of LED headlamp based on CFD

被引：0

作者：

Hu, Shuhong ^{[1
]}

Yu, Guiying ^{[1
]}

Cen, Yichao ^{[1
]}

机构：

[1] College of Metrology and Measurement Engineering, China Jiliang University, Hangzhou

来源：

Zhongguo Jiguang/Chinese Journal of Lasers | 2012年 / 39卷 / SUPPL.1期

关键词：

Ansys-icepak; Computational fluid dynamics; LED headlamp; Optimization design; Thermal system;

D O I：

10.3788/CJL201239.s116004

中图分类号：

学科分类号：

摘要：

The paper focuses on the heat dissipation efficiency problem existed with LED automobile headlamps. Based on computational fluid dynamics, Ansys-icepak is used to build plug-in fin and cylindrical fin models for LED headlamp heat dissipation structures. During simulation and optimization, the model's geometric parameters are set as variables, highest temperature and mass are set as constraint functions, thermal resistance is set as objective function. The result indicates that under the same boundary condition with 85°C initial temperature, the plug-in fin model has mass of 0.2756 kg, temperature rise of 12.52°C and thermal resistance of 1.026°C/W, which is better than cylindrical fin model, and accords with the heat dissipation standard of LED headlamp. During design in headlamps, an input air grill and an outlet are arranged at the front bottom and upper back of the headlamp respectively, the opposite direction wind generated from the moving automobile is taken to strengthen internal convection. The results show that when velocity is 2 m/s in grade one, the temperature rise is less than 10°C, which reflects higher heat dissipation efficiency.

引用

共 16 条

[1]

Actkahn T., Garimella S.V., Petroski J., Et al., Optimal design of miniature piezoelectric fans for cooling light emitting diodes, IEEE Inter Society Conference on Thermal Phenomena, 1, 4, pp. 663-671, (2004)

[2]

Schubert E.F., Light-Emitting Diodes, (2003)

[3]

Steigerwald D.A., Bhat J.C., Collins D.C., Illumination with solid state lighting technology, IEEE J. Sel. Top. Quantum Electron., 8, 2, pp. 310-320, (2002)

[4]

Oliver K., High power LED arrays special requirements on packaging technology, SPIE, 6143, pp. 1-8, (2006)

[5]

Mehmet A., Stanton W., Chip scale thermal management of high brightness LED packages, SPIE, 5530, pp. 214-223, (2004)

[6]

Kiyoshi S., Masaru S., Hiroyuki I., LED headlamps, SAE 2004 World Congress & Exhibition, (2004)

[7]

Michael H., Wolfgang H., Design claims and technical solution steps generating the world first full LED hheadlamp, SAE 2008, World Gongress & Exhibition, (2008)

[8]

Wang L., Wu K., Yu Y., Et al., Study on LED array heat transfer under natural convection based on CFD, J. Optoelectronics · Laser, 21, 12, pp. 1758-1761, (2010)

[9]

Zhu X., Yu G., Ding S., Et al., Transient temperature field and thermal stress of high power LED, Opto-Electronic Engineering, 38, 2, pp. 132-137, (2011)

[10]

Lai Y., Cordero N., Barthel F., Et al., Thermal management of bright LEDs for automotive applications, Thermal, Mechanical and Multiphysics Simulation and Experiments in Micro-Electronics and Micro-Systems, EuroSimE, 26, 6, pp. 1-5, (2006)

← 1 2 →