Indirect measurement method for axial load of aero-engine angular contact ball bearing

被引：0
|
作者：
Du J. [1 ]
Pan X. [1 ]
Liu T. [1 ]
机构：
[1] AECC Commercial Aircraft Engine Co., Ltd., Shanghai
来源：
Hangkong Xuebao/Acta Aeronautica et Astronautica Sinica | 2022年 / 43卷 / 09期
关键词：
aero-engine; angular contact ball bearing; axial load; indirect measurement; similarity principle;
D O I：
10.7527/S1000-6893.2021.25457
中图分类号：
学科分类号：
摘要：
The axial load of aero-engine angular contact ball bearing is an important parameter during the engine design. Therefore, it is very important to specify the value and direction of actual axial load for the safety and reliability of the bearing. To obtain an indirect measurement method for axial load of angular contact ball bearing, the key influence parameters analysis based on similarity principle and dimensional analysis which can be operated easily for real-time monitoring is presented in this paper. This method can obtain each component of axial load, which is helpful for the analysis and adjustment of axial load. The measurement results are compared with those of load cell measurement in bed tests. It was found that the results obtained by these two methods are in good agreement, and the relative difference is within the acceptable range. The indirect measurement method can be applied in engineering. © 2022 AAAS Press of Chinese Society of Aeronautics and Astronautics. All rights reserved.
引用
收藏
相关论文
共 20 条
  • [1] CHEN G., Analysis of aeroengine structure design, pp. 474-475, (2006)
  • [2] ZHENG J T, DENG S E, ZHANG W H, Et al., Atypical failure mechanism of aero-engine main shaft roller bearing, Acta Aeronautica et Astronautica Sinica, 41, 5, (2020)
  • [3] YANG L H, WANG T B., Axial load measurement of aero-engine thrust bearing, Aeroengine, 20, 2, pp. 54-61, (1994)
  • [4] JIMBOH K, AONO H, CHIKATA T, Et al., Thrust load measurement on aero-engine bearing, Journal of Engineering for Gas Turbines and Power, 107, 1, pp. 181-186, (1985)
  • [5] MERRITT U V., Direct measurement of bearing-thrust loads using strain gages, Experimental Techniques, 6, 4, pp. 8-11, (1982)
  • [6] TIPTON L P J., Bearing load measurements on a 3-shaft gas turbine, Applied Mechanics and Materials, 1-2, pp. 225-232, (2004)
  • [7] YANG D, LIU Z H, MA Q., Study of measuring technology of the axial fore of a gas turbine, Measurement & Control Technology, 23, 1, pp. 8-10, (2004)
  • [8] ZHANG C Y, BIAN J., Design and application of sensor for rotor axial force measurement of aeroengine, Instrument Technique and Sensor, 6, pp. 13-15, (2014)
  • [9] LU Y H, ZHANG C Y, BIAN J., Application of elastic ring method in measurement of axial load of angular contact ball bearings in turboshaft engine, Bearing, 11, pp. 48-50, (2013)
  • [10] BOZZI L, MALAVASI F, GAROTTA V., Heavy-duty gas turbines axial thrust calculation in different operating conditions, Proceedings of ASME 2011 Turbo Expo: Turbine Technical Conference and Exposition, pp. 945-954, (2011)
12