Evaluation model of residual stress field of pre-stretched aluminum alloy plate

被引：5

作者：

Wu Y.-X. ^{[1
]}

Gong H. ^{[1
]}

Liao K. ^{[1
]}

机构：

[1] College of Mechanical and Electrical Engineering, Central South University, Changsha 410083, Hunan

来源：

Huanan Ligong Daxue Xuebao/Journal of South China University of Technology (Natural Science) | 2011年 / 39卷 / 01期

关键词：

Aluminum alloy; Crack compliance method; Evaluation model; Pre-stretching; Residual stress;

D O I：

10.3969/j.issn.1000-565X.2011.01.017

中图分类号：

学科分类号：

摘要：

In order to easily measure, predict and further control the internal residual stress of thick aluminum alloy plates, first, the internal residual stress of thick 7075 aluminum alloy plate was measured by crack compliance method based on 3-factor 3-level orthogonal experiments. Next, the distribution law of the residual stress was summarized, and a shape function describing the stress distribution was established according to the distribution characteristics of the stress. Then, the relationship between the stress at key points and the residual stress of the plate surface was revealed via the nonlinear regression, and a model to evaluate the residual stress field of the pre-stretched plate was put forward. The model was applied to the evaluation of residual stress of a certain Al alloy plate, with its feasibility being verified at last.

引用

页码：90 / 94

页数：4

共 12 条

[1]

Michael P.B., Michael H.R., Residual stress, stress relief, and inhomogeneity in aluminum plate, Scripta Materialia, 46, 1, pp. 77-82, (2002)

[2]

Muammer K., John C., Taylan A., Prediction of residual stresses in quenched aluminium blocks and their reduction through cold working processes, Journal of Materials Processing Technology, 174, 1-3, pp. 342-354, (2006)

[3]

Ke Y.-L., Dong H.-Y., Pre-stretching process and its application in reducing residual stress of quenched 7075 aluminum alloy thick-plates, The Chinese Journal of Nonferrous Metals, 14, 4, pp. 639-645, (2004)

[4]

Tang Z.-T., Liu Z.-Q., Ai X., Et al., Measuring residual stresses depth profile in pre-stretched aluminium alloy plate using crack compliance method, The Chinese Journal of Nonferrous Metals, 17, 9, pp. 1404-1409, (2007)

[5]

Gong H., Wu Y.-X., Liao K., Influence of pre-stretching on residual stress distribution in 7075 aluminum alloy thick-plate, Transactions of Materials and Heat Treatment, 30, 6, pp. 201-205, (2009)

[6]

Liao K., Wu Y.-X., Gong H., Et al., Application of integral method on residual stress calculation along depth in aluminium alloy thick plate, The Chinese Journal of Nonferrous Metals, 19, 6, pp. 1006-1011, (2009)

[7]

Cheng W., Iain F., Residual Stress Measurement and the Slitting Method, (2006)

[8]

Michael P.B., Experimental procedure for crack compliance measurements of residual stress

[9]

Michael P.B., Residual stress measurement by successive extension of a slot: The crack compliance, Applied Mechanics Review, 52, 2, pp. 75-96, (1999)

[10]

Michael P.B., Thomas G.-H., Residual stress measurements in a thick, dissimilar aluminium alloy friction stir weld, Acta Materialia, 54, 15, pp. 4013-4021, (2006)

← 1 2 →