Parameter analysis and modelling of grinding special-shaped granite by diamond tools based on a robot stone machining system

被引：3
|
作者：
Wang J. [1 ]
Huang S. [1 ,2 ]
Huang J. [1 ]
Xu X. [1 ,2 ]
Cui C. [1 ,2 ]
机构：
[1] Institute of Manufacturing Engineering, Huaqiao University, Xiamen
[2] College of Mechanical Engineering and Automation, Huaqiao University, Xiamen
来源：
International Journal of Abrasive Technology | 2020年 / 10卷 / 01期
基金：
中国国家自然科学基金;
关键词：
ANNs; Artificial neural networks; Processing parameters; Robot machining; Special-shaped granite;
D O I：
10.1504/IJAT.2020.109617
中图分类号：
学科分类号：
摘要：
The processing parameters of special-shaped granite processing by robots are still determined artificially and the machining efficiency and quality are limited. To address this challenge, in this paper, the grinding process was divided into rough machining and finish machining with different diamond tools and parameters. The relationships among processing parameters, forces and errors of the cutting depth in rough machining and the relationships among processing parameters, contour errors and surface roughness in finish machining were investigated. Based on the experiments, the artificial neural networks of the two processes were conducted separately, having high precision with errors less than 9% and 6%, which can be used to direct the selection of the parameters. This research can be applied directly during production to improve the processing efficiency and quality. Copyright © 2020 Inderscience Enterprises Ltd.
引用
收藏
页码：62 / 82
页数：20
相关论文
共 4 条
  • [1] Crossbeam Analysis and Structure Optimization of Special-shaped Stone Combined Machining Center
    Zhang, Ke
    Ren, Juping
    Guo, Hua
    Wu, Yuhou
    Zhao, Kaijun
    DIGITAL DESIGN AND MANUFACTURING TECHNOLOGY, PTS 1 AND 2, 2010, 102-104 : 620 - +
  • [2] The influence of special-shaped stones machining parameters on wear performance of metal bonded diamond grinding wheel
    Huang, B
    Zhang, JS
    Li, JF
    Liu, ZW
    ADVANCES IN GRINDING AND ABRASIVE TECHNOLOGY XIII, 2006, 304-305 : 90 - 93
  • [3] Development and Analysis of Special-shaped Stone Multi-function NC Machining Center
    Zhang, Ke
    Zhao, Dehong
    Guo, Hua
    Hou, Baojia
    Wu, Yuhou
    ADVANCES IN ABRASIVE TECHNOLOGY XIII, 2010, 126-128 : 767 - +
  • [4] Data-Driven Modeling and Prediction Analysis for Surface Roughness of Special-Shaped Stone by Robotic Grinding
    Yin, Fangchen
    Ji, Qingzhi
    Cun, Changcai
    IEEE ACCESS, 2022, 10 : 67615 - 67629
1