Extraction of lipids and production of biodiesel from secondary tannery sludge by in situ transesterification

被引：31

作者：

Kumar V. ^{[1
]}

Thakur I.S. ^{[1
]}

机构：

[1] Environmental Microbiology and Biotechnology Laboratory, School of Environmental Sciences, Jawaharlal Nehru University, New Delhi

来源：

Bioresource Technology Reports | 2020年 / 11卷

关键词：

Biodiesel; Fatty acid methyl esters; GC–MS analysis; In-situ transesterification; Tannery sludge;

D O I：

10.1016/j.biteb.2020.100446

中图分类号：

学科分类号：

摘要：

The aim of present study is to investigate the effect of different solvent on lipids extraction efficiency and biodiesel production under optimized process parameters from tannery sludge. Results have revealed that standard chloroform-methanol method has a higher lipid yield of 22.8% (w/v), corresponding to 98.5% (w/v) of lipid extraction efficiency at optimal conditions. The optimized conditions for in-situ transesterification procedure were: catalyst concentration of 3% (v/v), sludge solid to methanol ratio of 1: 25 (w/v), reaction temperature of 60 °C, and time of 12 h, achieving 89.7% yield of biodiesel. Further, the FAME profile of biodiesel analyzed by FT-IR, 1H and 13C NMR, and GC–MS showed the purity of higher than 97.12%. The physicochemical properties of 5% blended biodiesel were found to be within the ASTM standards. This work concluded the production of biodiesel from sludge could be techno-economically viable due to extremely high lipids yield and low-cost of this feedstock. © 2020 Elsevier Ltd

引用

共 50 条

[31]

Macias-Sanchez M.D., Robles-Medina A., Hita-Pena E., Jimenez-Callejon M.J., Esteban-Cerdan L., Gonzalez-Moreno P.A., Molina-Grima E., Biodiesel production from wet microalgal biomass by direct, Fuel, 150, pp. 14-20, (2015)

[32]

Malaiskiene J., Kizinievic O., Kizinievi V., A study on tannery sludge as a raw material for cement mortar, Materials, 12, (2019)

[33]

Nurun N., Mostafizur R., Muhammaad A.I., Farhad M.H., Peter B., William N.R., John T., Zoran D.R., Richard J.B., Fuel characterization, engine performance, combustion and exhaust emissions with a new renewable Licella biofuel, Ener. Convers. Manage., 96, pp. 588-598, (2015)

[34]

Olkiewicz M., Caporgno M.P., Fortuny A., Stuber F., Fabregat A., Font J., Bengoa C., Direct liquid–liquid extraction of lipid from municipal sewage sludge for biodiesel production, Fuel Process. Technol., 128, pp. 331-338, (2014)

[35]

Pati A., Chaudhary R., Subramani S., A review on management of chrome-tanned leather shavings: a holistic paradigm to combat the environmental issues, Environ. Sci. Pollut. Res., 21, 19, pp. 11266-11282, (2014)

[36]

Ramteke P.W., Awasthi S., Srinath T., Joseph B., Efficiency assessment of Common Effluent Treatment Plant (CETP) treating tannery effluents, Environ. Monit. Assess., 169, pp. 125-131, (2010)

[37]

Revellame E., Hernandez R., French W., Holmes W., Alley E., Callahan R., Production of biodiesel from wet activated sludge, J. Chem. Technol. Biotechnol., (2010)

[38]

Rice E.W., Baird R.B., Eaton A.D., Clesceri L.S., Standard Methods for the Examination of Water and Wastewater 22nd 571 (2012), (2012)

[39]

Sani A.S., Kaisanb M.U., Kullab D.M., Obib A.I., Jibrinc A., Ashok B., Determination of physico chemical properties of biodiesel from Citrullus lanatus seeds oil and diesel blends, Ind. Crop. Prod., 122, pp. 702-708, (2018)

[40]

Siddiquee M.N., Rohani S., Experimental analysis of lipid extraction and biodiesel production from wastewater sludge, Fuel Process. Technol., 92, pp. 2241-2251, (2011)

← 1 2 3 4 5 →