The microstructure of AlSi7Mg alloy in as cast condition

被引：6
|
作者：
Silesian University of Technology, ul. Krasińskiego 8, Katowice [1 ]
40-019, Poland
不详 [2 ]
02-507, Poland
机构：
来源：
Solid State Phenomena | / 3-10期
关键词：
Scanning electron microscopy - High resolution transmission electron microscopy - Magnesium alloys - Magnesium compounds - Microstructure - Silicon alloys;
D O I：
10.4028/www.scientific.net/SSP.229.3
中图分类号：
学科分类号：
摘要：
The complex microstructure of as-cast AlSi7Mg alloy has been investigated. Microstructure observations were done using light microscopy, scanning electron microscopy and transmission electron microscopy. Chemical composition of the microstructure constituents was investigated by means of energy dispersive spectrometry, conducted both during SEM and STEM investigations. Selected area diffraction was used to identify the phases in the alloy. Microstructure of the alloy in the as-cast condition consists of Al-Si eutectic and intermetallic phases in the interdendritic regions. These are: Mg2Si, α-AlFeMnS, β-AlFeSi and π-AlFeSiMg phases. What is more, number of fine precipitates were found within the α-Al dendrites. Only the occurrence of U1 (MgAl2Si2) phase has been confirmed. © (2015) Trans Tech Publications, Switzerland.
引用
收藏
相关论文
共 50 条
  • [31] Effect of Al5TiB Master Alloy with P on Microstructure and Mechanical Properties of AlSi7Mg Alloy
    Lipinski, Tomasz
    METALS, 2023, 13 (09)
  • [32] Effect of heat treatment on microstructure, mechanical and thermal properties of selective laser melted AlSi7Mg alloy
    Ming, Xianliang
    Song, Deru
    Yu, Aotian
    Tan, Hua
    Zhang, Qiang
    Zhang, Zhiwei
    Chen, Jing
    Lin, Xin
    JOURNAL OF ALLOYS AND COMPOUNDS, 2023, 945
  • [33] Effect of AlSi7Mg alloy slurry initial microstructure in the solid-liquid zone on thixotropic deformation
    Chen, Xiaoyang
    Zeng, Daben
    Zhong, Xueyou
    Jinshu Xuebao/Acta Metallurgica Sinica, 2000, 36 (03): : 247 - 250
  • [34] The Influence of the Proportions of Titanium and Boron in the Al and AlSi7-Based Master Alloy on the Microstructure and Mechanical Properties of Hypoeutectic Silumin, AlSi7Mg
    Lipinski, Tomasz
    APPLIED SCIENCES-BASEL, 2023, 13 (23):
  • [35] Influence of thermal rate treatment and low temperature pouring on microstructure and tensile properties of AlSi7Mg alloy
    Wang, Hongwei
    Li, Bao
    Jie, Jinchuan
    Wei, Zunjie
    MATERIALS & DESIGN, 2011, 32 (05) : 2992 - 2996
  • [36] Structural evolution of non dendritic AlSi7Mg alloy during reheating
    Zhang Kui(张 奎)
    TransactionsofNonferrousMetalsSocietyofChina, 1999, (03) : 553 - 556
  • [37] Study of the validity of the Niyama criteria function applied to the alloy AlSi7Mg
    Liotti, E.
    Previtali, B.
    Metallurgia Italiana, 2006, 98 (09): : 33 - 37
  • [38] Analysis of microstructure in AlSi7Mg0.3 cast alloy with different content of Fe
    Kucharikova, Lenka
    Tillova, Eva
    Chalupova, Maria
    Mazur, Magdalena
    Hercko, Adrian
    Cicka, Roman
    13TH INTERNATIONAL SCIENTIFIC CONFERENCE ON SUSTAINABLE, MODERN AND SAFE TRANSPORT (TRANSCOM 2019), 2019, 40 : 59 - 67
  • [39] Fatigue crack initiation and damage mechanisms during ultrasonic fatigue testing of cast aluminium alloy AlSi7Mg
    Krewerth, Dominik
    Weidner, Anja
    Biermann, Horst
    FDMD II - JIP 2014 - FATIGUE DESIGN & MATERIAL DEFECTS, 2014, 12
  • [40] THE INFLUENCE OF HEAT TREATMENT PARAMETERS ON THE ELECTRICAL CONDUCTIVITY OF AlSi7Mg AND AlSi10Mg ALUMINUM CAST ALLOYS
    Uliasz, Piotr
    Knych, Tadeusz
    Piwowarska, Marzena
    Wiechec, Justyna
    PROCEEDINGS OF THE 13TH INTERNATIONAL CONFERENCE ON ALUMINUM ALLOYS (ICAA13), 2012, : 129 - 135
12345