The microstructure of AlSi7Mg alloy in as cast condition

被引:6
作者
Silesian University of Technology, ul. Krasińskiego 8, Katowice [1 ]
40-019, Poland
不详 [2 ]
02-507, Poland
机构
[1] Silesian University of Technology, ul. Krasińskiego 8, Katowice
[2] Warsaw University of Technology, ul. Wołoska 141, Warszawa
来源
Solid State Phenomena | / 3-10期
关键词
AlSi7Mg alloy; As-cast condition; Microstructure; Phase identification; TEM;
D O I
10.4028/www.scientific.net/SSP.229.3
中图分类号
学科分类号
摘要
The complex microstructure of as-cast AlSi7Mg alloy has been investigated. Microstructure observations were done using light microscopy, scanning electron microscopy and transmission electron microscopy. Chemical composition of the microstructure constituents was investigated by means of energy dispersive spectrometry, conducted both during SEM and STEM investigations. Selected area diffraction was used to identify the phases in the alloy. Microstructure of the alloy in the as-cast condition consists of Al-Si eutectic and intermetallic phases in the interdendritic regions. These are: Mg2Si, α-AlFeMnS, β-AlFeSi and π-AlFeSiMg phases. What is more, number of fine precipitates were found within the α-Al dendrites. Only the occurrence of U1 (MgAl2Si2) phase has been confirmed. © (2015) Trans Tech Publications, Switzerland.
引用
收藏
页码:3 / 10
页数:7
相关论文
共 16 条
  • [1] Liu Y.L., Kang S.B., Kim H.W., The complex microstructures in an as-cast Al-Mg-Si alloy, Materials Letters, 41, pp. 267-272, (1999)
  • [2] Nafisia S., Ghomashchib R., Valia H., Eutectic nucleation in hypoeutectic Al-Si alloys, Materials Characterization, 59, pp. 1466-1473, (2008)
  • [3] Makhlouf M.M., Guthy H.V., The aluminum-silicon eutectic reaction: Mechanisms and crystallography, Journal of Light Metals, 1, pp. 199-218, (2001)
  • [4] Rana G., Zhoua J.E., Wang Q.G., Precipitates and tensile fracture mechanism in a sand cast A356 aluminum alloy, Journal of Materials Processing Technology, 207, pp. 46-52, (2008)
  • [5] Cao X., Campbell J., Morphology of β-Al5FeSi Phase in Al-Si Cast Alloys, Materials Transactions, 47, pp. 1303-1312, (2006)
  • [6] Taylor J.A., The effect of iron in Al-Si casting alloys, Casting Concepts. 35Th Australian Foundry Institute National Conference, pp. 148-157, (2004)
  • [7] Kuijpers N., Vermolen F.J., Vuik C., Koenis P., Nilsen K.E., van der Zwaag S., The dependence of the β-AlFeSi to α-Al(FeMn)Si transformation kinetics in Al-Mg-Si alloys on the alloying elements, Materials Science and Engineering A, 394, pp. 9-19, (2005)
  • [8] Romming C., Hannsen V., Gjonnes J., Crystal structure of β-Al4.5FeSi, Acta Crystallogarphica, B50, pp. 307-312, (1994)
  • [9] Hansen V., Hauback B., Sundberg M., Rumming C., Gjunnes J., β-Al4.5FeSi: A Combined Synchrotron Powder Diffraction, Electron Diffraction, High-Resolution Electron Microscopy and Single-Crystal X-ray Diffraction Study of a Faulted Structure, Acta Crystallograhpica, B54, pp. 351-357, (1998)
  • [10] Caceres C.H., Davidson C.J., Griffiths J.R., Wang Q.G., The Effect of Mg on the Microstructure and Mechanical Behavior of Al-Si-Mg Casting Alloys, Metallurgical and Materials Transactions A, 30A, pp. 2611-2618, (1999)