Prediction based optimal control of a quadruple tank process

被引：1

作者：

Muthukumar, N. ^{[1
]}

Gomathi, V. ^{[1
]}

Ramkumar, K. ^{[1
]}

Balasubramanian, G. ^{[1
]}

机构：

[1] School of EEE/EIE, SASTRA University, Thanjavur

来源：

Proceedings of IEEE International Conference on Circuit, Power and Computing Technologies, ICCPCT 2013 | 2013年

关键词：

Multivariable Process Generalized Predictive controller; Quadruple Tank;

D O I：

10.1109/ICCPCT.2013.6529033

中图分类号：

学科分类号：

摘要：

Industrial processes are nonlinear, multivariate, constrained and interactive in nature. To ensure stable operation of the process under these circumstances, a tight control action should be employed. Conventional controllers like PID provides simplicity in design and ease of access but fails to provide good control action for the process which are nonlinear and operating under heavy constraints. In this paper Model predictive controller has been designed for a bench mark quadruple tank process and its performance is compared with a PI controller. It is found that Model predictive controller provides satisfactory results when compared to PI controllers. © 2013 IEEE.

引用

页码：685 / 690

页数：5

共 14 条

[1]

Darby M.L., Nikolaou M., MPC: Current practice and challenges, Control Engineering Practice, 20, pp. 328-342, (2012)

[2]

Garelli, Mantz R.J., De Battista H., Limiting interactions in decentralized control of MIMO systems, Journal of Process Control, 16, pp. 473-483, (2006)

[3]

Biswas P.P., Srivastava R., Ray S., Amar nath samanta, sliding mode control of quadruple tank process, Mechatronics, 19, pp. 548-561, (2009)

[4]

Alipouri Y., Poshtan J., Designing a robust minimum variance controller using discrete slide mode controller approach, ISA Transactions

[5]

Johansson K.H., The quadruple-tank process: A multivariable process with an adjustable zero, EEE Trans. Control Syst. Technol, 8, 3, pp. 456-465, (2000)

[6]

Astrom K.J., Johansson K.H., Wang Q.-G., Design of decoupled PI controllers for two-by-two systems, IEEE Proceedings Online No. 20020087

[7]

Joe Qina S., Badgwell T.A., A survey of industrial model predictive control technology, Control Engineering Practice, 11, pp. 733-764, (2003)

[8]

Clarke D.W., Mohtadi C., Tuffs P.S., Generalized predictive control - Part I. The basic algorithm, Automatica., 23, 2, pp. 137-148, (1987)

[9]

Rossiter J.A., Model Based Predictive Control - A Practical Approach, (2004)

[10]

Johansson K.H., Horch A., Wijk O., Hansson A., Teaching multivariable control using the quadruple-tank process, Proceedings of the 38th IEEE Conference on Decision and Control, (1999)

← 1 2 →