Application of SimpliciTI based wireless ad-hoc network in intelligent monitoring and control system for distribution networks

被引:0
作者
机构
[1] State Key Laboratory of Advanced Electromagnetic Engineering and Technology, Huazhong University of Science and Technology
来源
Dai, Q. (day_qs@163.com) | 1600年 / Automation of Electric Power Systems Press卷 / 38期
关键词
Distribution network; Intelligent monitoring and control; SimpliciTI protocol; Wireless ad-hoc network; Wireless communication network device;
D O I
10.7500/AEPS20130726010
中图分类号
学科分类号
摘要
For substations in which the equipment has to be located dispersively because of the geographical conditions or the substations where communication cables are difficult to lay, the wireless ad-hoc network for the communication within a substation has more advantages. According to the characteristics of the intelligent monitoring and control system for distribution networks, this paper proposes a dendriform wireless ad-hoc communication network based on the SimpliciTI technology for the communication within a substation mentioned above. The principle of the monitoring terminal device and the data center device contained in the proposed dendriform network as well as the implementation process are described in detail. Then the data encryption method and the measures to improve the communication reliability are explained. Finally, an application example is given to show the reliability of the proposed wireless ad-hoc communication network. © 2014 State Grid Electric Power Research Institute Press.
引用
收藏
页码:83 / 87
页数:4
相关论文
共 14 条
  • [1] (2010)
  • [2] Li X., Shen L., Wang H., Research progress in communication modes for distribution monitoring terminal, Central China Electric Power, 21, 3, pp. 39-43, (2008)
  • [3] Xu R., The possibility of using Zigbee communication technology in distribution automation system, Power System Technology, 32, 1, pp. 103-105, (2008)
  • [4] Guo M., Yang Z., Yang G., Et al., Wireless network monitoring system based on ZigBee Pro technology for distribution lines, Electric Power Automation Equipment, 30, 9, pp. 105-110, (2010)
  • [5] Han B., Sheng G., Jiang X., Et al., An online thermal condition monitoring system with wireless sensor network based on ZigBee technology for transmission line joints, Automation of Electric Power Systems, 32, 16, pp. 72-77, (2008)
  • [6] Liu W., Zhang T., Hu Z., Et al., A transmission line monitoring device based on ultrasonic and wireless networking technologies, Automation of Electric Power Systems, 37, 10, pp. 98-107, (2013)
  • [7] Zhao Z., Shi G., Han S., Et al., A heterogeneous wireless sensor network based remote district high-voltage transmission line on-line monitoring system, Automation of Electric Power Systems, 33, 19, pp. 80-84, (2009)
  • [8] (2009)
  • [9] (2012)
  • [10] (2012)