The roughness of the hardened steel surface created by the rolling-burnishing process

被引：3
作者：
Ścibiorski, Bogdan [1 ]
Dzionk, Stefan [1 ]
机构：
[1] Department of Manufacturing Engineering and Automation, Gdańsk University of Technology, ul. Narutowicza 11/12, Gdańsk
来源：
Solid State Phenomena | 2015年 / 220-221卷
关键词：
Burnishing method; Hardened steel; Surface roughness;
D O I：
10.4028/www.scientific.net/SSP.220-221.881
中图分类号：
学科分类号：
摘要：
Burnishing hard materials can be used as an alternative finishing process. This paper presents the results of burnishing hardened steel. The article discusses surface deformation that occurs during this process and depends on the selected parameters of the geometric structure of the force applied for surface burnishing. © (2015) Trans Tech Publications, Switzerland.
引用
收藏
页码：881 / 886
页数：5
相关论文
共 8 条
  • [1] Prevey P.S., Jayaraman N., Cammett J., Overview of low plasticity burnishing for migration of fatigue damage mechanism, (2005)
  • [2] Luca L., Neagu-Ventzel S., Marinescu I., Effects of working parameters on surface finish in ball-burnishing of hardened steel, Precision Engineering, 29, pp. 253-256, (2005)
  • [3] Fang-Jung S., Chuing-Hsiung C., Precision surface finish of the mold steel PDS5 using an innovative ball burnishing tool embedded with a load cell, Precision Engineering, 34, pp. 76-84, (2010)
  • [4] Hammadache I.H., Laouar L., Zeghib N.E., Chaoui K., Characteristic of rb40 steel superficial layer under ball and roller burnishing, Journal of Materials Processing Technology, 180, pp. 130-136, (2006)
  • [5] Fang-Jung S., Hong-Siang C., Ultra-precision surface finish of hardened stainless mold steel using vibration-assisted ball polishing process, International Journal of Machine Tools & Manufacture, 48, pp. 721-732, (2008)
  • [6] Grzesik W., Zak K., Modification of surface finish produced by hard turning using superfinishing and burnishing operations, Journal of Materials Processing Technology, 212, pp. 315-322, (2012)
  • [7] Klocke F., Libermann J., Roller burnishing of hard turned surfaces, International Journal of Machine Tools & Manufacture, 38, 5-6, pp. 419-423
  • [8] Dzionk S., Przybylski W., Surface waviness of components machined by burnishing method, Archives of Mechanical Technology and Automation, 32, 3, pp. 25-33, (2012)
1