Multiple nonlinear regression model of weld bead shape for high nitrogen steel by laser-arc hybrid welding

被引：4

作者：

Sun, Shuo ^{[1
]}

Liu, Shuangyu ^{[1
]}

Jia, Dongsheng ^{[2
]}

Zhang, Hong ^{[1
]}

Liu, Fengde ^{[1
]}

机构：

[1] College of Electromechanical Engineering, Changchun University of Science and Technology, Changchun

[2] Inner Mongolia First Machinery Group Corporation, Baotou

来源：

Jixie Gongcheng Xuebao/Journal of Mechanical Engineering | 2015年 / 51卷 / 08期

关键词：

High nitrogen steel; Laser-arc hybrid welding; Mathematical regression model; Response surface method (RSM);

D O I：

10.3901/JME.2015.08.067

中图分类号：

学科分类号：

摘要：

The experiments is designed based on the response surface method, implemented by bead-on-plate welding with laser Nd:YAG-metal active gas welding (MAG) hybrid welding, and using obtained beam appearance data and filtering out significant factors by stepwise regression method to establish multiple nonlinear mathematical regression model. By analysis of variance and regression analysis showed that R2 the regression model are 0.932, 0.915 and 0.910, P>F<0.001, respectively. The weld bead geometry was affected by the laser power, welding current, arc voltage and distance between two sources and these factors' interaction. The main effect on penetration is the laser power, while the interactive effect is laser power and arc voltage; the main effect on the weld width is welding current and arc voltage, while the interactive effect is welding current and distance between two sources, arc voltage and distance between two sources, laser power and arc voltage; the main effect on the reinforcement is welding current, while the interactive effect is arc voltage and distance between two sources. The results show the simulating results are consistent with the measured results. ©2015 Journal of Mechanical Engineering

引用

页码：67 / 75

页数：8

共 20 条

[1] Campana G., Ascari A., Fortunato A., Et al., Hybrid laser-MIG welding of aluminum alloys: The influence of shielding gases, Applied Surface Science, 255, 10, pp. 5588-5590, (2009)
[2] Tani G., Campana G., Fortunato A., Et al., The influence of shielding gas in hybrid laser-MIG welding, Applied Surface Science, 253, 19, pp. 8050-8053, (2007)
[3] Kim T., Park H., Rhee S., Optimization of welding parameters for resistance spot welding of TRIP steel with response surface methodology, International of Production Research, 43, 21, pp. 4643-4657, (2005)
[4] Benyounis K.Y., Olabi A.G., Hashmi M.S.J., Optimising the laser-welded butt-joints of medium carbon steel using RSM, Journal of Materials processing Technology, 164-165, pp. 986-989, (2005)
[5] Gunaraj V., Murugan N., Application of response surface methodology for predicting weld bead quality in submerged arc welding of pipes, Materials Processing Technology, 88, 1-3, pp. 266-275, (1999)
[6] Gao M., Zeng X., Yan J., Effects of welding parameters on melting energy of CO2 laser-GMA hybrid welding, Science and Technology of Welding and Joining, 11, 5, pp. 517-522, (2006)
[7] Moradi M., Ghoreishi M., Frostevarg J., Et al., An investigation on stability of laser hybrid arc welding, Optics and Laser in Engineering, 51, 4, pp. 481-487, (2013)
[8] Tusek J., Suban M., Hybrid welding with arc and laser beam, Science and Technology of Welding and Joining, 4, 5, pp. 308-311, (1999)
[9] Liu S., Liu F., Zhang H., Et al., Analysis of droplet transfer mode and forming process of weld bead in CO2 laser-MAG hybrid welding process, Optics & Laser Technology, 44, 4, pp. 1019-1025, (2012)
[10] Liu S., Liu F., Xu C., Et al., Experimental investigation on arc characteristic and droplet transfer in CO2 laser-metal arc gas (MAG) hybrid welding, International Journal of Heat and Mass Transfer, 62, pp. 604-611, (2013)

← 1 2 →