Intelligent optimal setting method of secondary air flow in municipal solid waste incineration process

被引：0

作者：

Ding C.-X. ^{[1
,2
]}

Yan A.-J. ^{[1
,2
,3
]}

Wang D.-H. ^{[4
,5
,6
]}

机构：

[1] Faculty of Information Technology, Beijing University of Technology, Beijing

[2] Engineering Research Center of Digital Community of Ministry of Education, Beijing

[3] Beijing Laboratory for Urban Mass Transit, Beijing

[4] Artificial Intelligence Research Institute, China University of Mining and Technology, Xuzhou

[5] State Key Laboratory of Synthetical Automation for Process Industries, Northeastern University, Shenyang

[6] Department of Computer Science and Information Technology, La Trobe University, Melbourne, 3086, VIC

来源：

Kongzhi yu Juece/Control and Decision | 2024年 / 39卷 / 01期

关键词：

case-based reasoning; evaluation; intelligent compensation; learning; optimal setting; stochastic configuration network; waste incineration;

D O I：

10.13195/j.kzyjc.2022.0349

中图分类号：

学科分类号：

摘要：

Aiming at the secondary air flow of waste incineration process are usually set according to manual experience, which is subjective and arbitrary, so that the pollutant emission concentration does not meet the standard, an intelligent optimal setting method is proposed. Firstly, a case-based reasoning pre-set model, and an evaluation and learning model of secondary air flow setpoint are constructed. Secondly, a stochastic configuration network process index prediction model is established. Then, an intelligent compensation model based on the RBF neural network self-learning fuzzy inference is constructed. Finally, the pre-set model, process index prediction model, intelligent compensation model and evaluation and learning model of setpoint are organically integrated, the structure and function of the intelligent optimal setting method are designed, and algorithm implementation is given. The experimental results based on historical data of a waste incineration plant show that the fluctuation degree of setpoint obtained by this method is less, and the control system running according to the setpoint can reduce the pollutant emission concentration, which can promote the realization of operation optimal goal in the incineration process. © 2024 Northeast University. All rights reserved.

引用

页码：49 / 58

页数：9

共 21 条

[1]

Li Y, Zhao X G, Li Y B, Et al., Waste incineration industry and development policies in China, Waste Management, 46, 8, pp. 234-241, (2015)

[2]

Hu Z F, Jiang E C, Ma X Q., Numerical simulation on NOX emissions in a municipal solid waste incinerator, Journal of Cleaner Production, 233, pp. 650-664, (2019)

[3]

Chan K T, Yu F W., Optimum setpoint of condensing temperature for air-cooled chillers, HVAC&R Research, 10, 2, pp. 113-127, (2004)

[4]

Guerrero J, Guisasola A, Vilanova R., Improving the performance of a WWTP control system by model-based setpoint optimisation, Environmental Modelling & Software, 26, 4, pp. 492-497, (2011)

[5]

Sun B, Gui W H, Wang Y L, Et al., Intelligent optimal setting control of a cobalt removal process, Journal of Process Control, 24, 5, pp. 586-599, (2014)

[6]

Lawrynczuk M., Online set-point optimisation cooperating with predictive control of a yeast fermentation process: A neural network approach, Engineering Applications of Artificial Intelligence, 24, 6, pp. 968-982, (2011)

[7]

Wang W, Li H X, Zhang J T., A hybrid approach for supervisory control of furnace temperature, Control Engineering Practice, 11, 11, pp. 1325-1334, (2003)

[8]

Wang J S, Ning C X, Yang Y., Rough set based operation pattern extraction and set-point optimization of electroslag remelting process, ICIC Express Letters, Part B: Applications, 5, 4, pp. 1185-1191, (2014)

[9]

Zhang B C, Zhang Y, Hu G Y, Et al., A method of automatically generating initial parameters for large-scale belief rule base, Knowledge-Based Systems, 199, (2020)

[10]

Chai T Y, Zhao L, Qiu J B, Et al., Integrated network-based model predictive control for setpoints compensation in industrial processes, IEEE Transactions on Industrial Informatics, 9, 1, pp. 417-426, (2013)

← 1 2 3 →