Analysis of heat transfer in enclosed diesel engine room of autonomous underwater vehicle

被引：0

作者：

Yang, Yi ^{[1
]}

Zhu, Xing-Hua ^{[1
]}

Hu, Zhi-Qiang ^{[1
]}

Zheng, Rong ^{[1
]}

Lin, Yang ^{[1
]}

机构：

[1] Shenyang Institute of Automation, Chinese Academy of Sciences, Shenyang

来源：

Neiranji Gongcheng/Chinese Internal Combustion Engine Engineering | 2015年 / 36卷 / 04期

关键词：

Autonomous underwater vehicles (AUV); Diesel engine; Enclosed engine-room; Heat transfer; IC engine; Temperature field;

D O I：

10.13949/j.cnki.nrjgc.2015.04.017

中图分类号：

学科分类号：

摘要：

Heat transfer in the enclosed diesel engine-room of autonomous underwater vehicles was analyzed under two working conditions by using the three analysis methods of analytical method, simplified simulation of steady heat transfer and CFD simulation, by which the temperature field of the engine-room was obtained. The results show that the injecting air to the engine-room is a better solution than bringing air direct to the intakes of the diesel engines in terms of heat dissipation and the temperature requirement inside the engine-room. Moreover, the comparison of the three analysis methods can draw the following conclusions: firstly the analytical method can only be used to calculate the temperature field of the engine-room with the help of a simplified model; secondly the simulation of steady heat transfer using the simplified model is suitable for the analysis of heat transfer under the condition of bringing air direct to the intakes of the diesel engines; finally the CFD analysis is suitable for the analysis of heat transfer under the condition of injecting the air to the engine-room. ©, 2015, Chinese Society for Internal Combustion Engines. All right reserved.

引用

页码：85 / 89and98

页数：8913

共 6 条

[1] Wang X.M., Shang J.Z., Luo Z.R., Et al., Review of power systems and environment energy conversion for unmanned vehicles, Renewable and Sustainable Energy Reviews, 16, pp. 1958-1970, (2012)
[2] Wang L.L., Enclosed circulating diesel engines for UUV, Robot Technology&Applications, 5, (1997)
[3] Song H.W., Li S.X., Zhang L., Et al., Numerical simulation of thermal loading produced by shaped high power laser onto engine parts, Applied Thermal Engineering, 30, pp. 553-560, (2010)
[4] Qian Z.Q., Wu J.B., Wang S.D., Temperature measurement and three dimensional simulation for the machine body of diesel engine, Journal of Wuhan University of Technology, 3, pp. 70-73, (2005)
[5] Lall P., Pecht M., Hakim E.B., Characterization of functional relationship between temperature and microelectronic reliability, Microelectronics Reliability, 35, pp. 377-402, (1995)
[6] Yan Z.D., Liu Z.T., Rui Y., Et al., Simulation of in-cylinder radiative heat transfer of diesel engine with monte-carlo method, Journal of Zhejiang University (Science), 3, pp. 300-310, (2000)

← 1 →