Mechanical alloying of the fe-cr mixture and stabilization of the sintered nanostructure by carbon addition

被引：0
|
作者：
Amirouche, Saïfi [1 ,2 ]
Bezzazi, Boudjema [2 ]
Nechiche, Mustapha [3 ]
Azem, Said [3 ]
机构：
[1] Center for Scientific and Technical Research in Physico-chemical Analysis (CRAPC), Tipasa, Bou Ismail, Algeria
[2] Materials, Processes and Environment Research Unit (M.P.E.R.U.), Boumerdes University, Algeria
[3] Mechanical Engineering department, Mouloud Mammeri University of Tizi-Ouzou, Algeria
来源：
UPB Scientific Bulletin, Series B: Chemistry and Materials Science | 2021年 / 83卷 / 02期
关键词：
Binary alloys - Crystallite size - Iron alloys - Carbon - Chromium alloys - Chromium compounds - Nanostructures - Scanning electron microscopy - Carbides - Mechanical alloying - Mixtures;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
The present work concerns the mechanical alloying of the iron-chromium mixture (Fe20% Cr) and the evolution of the crystallite size before and after sintering at high temperature. A study was conducted on the stability of the nanostructure of the sintered material. The effect of adding carbon on the structure and the crystallite size was studied for the sintered material. The X-ray diffraction technique was used to identify the new phases and measure the crystallite size as well as the microstrains induced by mechanical alloying. Scanning electron microscopy revealed structural changes in the milled and sintered material. © 2021, Politechnica University of Bucharest. All rights reserved.
引用
收藏
页码：259 / 272
相关论文
共 50 条
  • [41] Effect of spinodal decomposition on the mechanical behavior of Fe-Cr alloys
    Soriano-Vargas, Orlando
    Avila-Davila, Erika O.
    Lopez-Hirata, Victor M.
    Cayetano-Castro, Nicolas
    Gonzalez-Velazquez, Jorge L.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2010, 527 (12): : 2910 - 2914
  • [42] The effect of silicon addition on the high temperature oxidation of a Fe-Cr alloy
    Mikkelsen, L
    Linderoth, S
    Bilde-Sorensen, J
    HIGH TEMPERATURE CORROSION AND PROTECTION OF MATERIALS 6, PRT 1 AND 2, PROCEEDINGS, 2004, 461-464 : 117 - 122
  • [43] CARBON TRANSPORT THROUGH OXIDE SCALES ON FE-CR ALLOYS
    WOLF, I
    GRABKE, HJ
    SCHMIDT, P
    OXIDATION OF METALS, 1988, 29 (3-4): : 289 - 306
  • [44] Heat treatment applied to carbon steels sintered powders of Fe and Fe3C powder obtained by mechanical alloying
    Ciobanu, M.
    Nicolicescu, C.
    Bucse, I. G.
    Stefan, I.
    JOURNAL OF OPTOELECTRONICS AND ADVANCED MATERIALS, 2013, 15 (7-8): : 797 - 802
  • [45] Application of synchrotron radiation to investigate deformation behavior of sintered Fe-Cr/TiN composites
    Takago, S
    Sasaki, T
    Hirose, Y
    PROCEEDINGS OF THE 10TH (2000) INTERNATIONAL OFFSHORE AND POLAR ENGINEERING CONFERENCE, VOL IV, 2000, : 124 - 129
  • [46] Structural and compositional changes during mechanical milling of the Fe-Cr system
    Pandey, B
    Rao, MA
    Verma, HC
    Bhargava, S
    JOURNAL OF PHYSICS-CONDENSED MATTER, 2005, 17 (50) : 7981 - 7993
  • [47] Mechanical alloying induced amorphization in Cr-Fe system
    Xia, SK
    Assuncao, FCR
    BaggioSaitovich, E
    METASTABLE, MECHANICALLY ALLOYED AND NANOCRYSTALLINE MATERIALS, PTS 1 AND 2, 1996, 225 : 459 - 464
  • [48] The effect of tungsten on microstructure and mechanical performance of an ultrafine Fe-Cr steel
    Mazilkin, A.
    Abramova, M. M.
    Enikeev, N. A.
    Lomakin, I., V
    Valiev, R. Z.
    Ivanisenko, Yu
    Kuebel, C.
    Etienne, A.
    Sauvage, X.
    Radiguet, B.
    MATERIALS LETTERS, 2018, 227 : 292 - 295
  • [49] MECHANICAL PROPERTIES OF FE-CR ALLOYS EMBRITTLED AT 475 DEGREES C
    IMAI, Y
    NISHINO, K
    NAKAGAWA, Y
    SCIENCE REPORTS OF THE RESEARCH INSTITUTES TOHOKU UNIVERSITY SERIES A-PHYSICS CHEMISTRY AND METALLURGY, 1966, S 18 : 569 - &
  • [50] Local Structure of Fe–Cr Powders Prepared by Mechanical Alloying
    Yu. V. Baldokhin
    V. V. Cherdyntsev
    Inorganic Materials, 2018, 54 : 537 - 545
12345