Numerical analysis of mudmat contribution to capacity of piled offshore platforms

被引:0
|
作者
Arup Pty. Ltd., Perth, Australia [1 ]
不详 [2 ]
机构
来源
Front. Offshore Geotech. - Proc. Int. Symp. Front. Offshore Geotech. | / 525-529期
关键词
Compendex;
D O I
暂无
中图分类号
学科分类号
摘要
Foundations
引用
收藏
相关论文
共 7 条
  • [1] Bearing capacity of the bucket spudcan foundation for offshore jack-up drilling platforms
    School of Civil Engineering, Tianjin University, Tianjin 300072, China
    不详
    Shiyou Kantan Yu Kaifa, 2 (237-242):
  • [2] Analysis of dynamic reliability of offshore jacket platforms subjected to seismic action
    Inst. of Structural Eng., Zhejiang Univ., Hangzhou 310027, China
    Zhejiang Daxue Xuebao (Gongxue Ban), 1600, 3 (233-238):
  • [3] Seismic performance of jacket type offshore platforms through incremental dynamic analysis
    Civil Engineering Faculty, K. N. Toosi University of Technology, Tehran 15875-4416, Iran
    J. Offshore Mech. Arct. Eng., 1600, 3 (1-14):
  • [4] Numerical analysis of offshore skirted footings on double layer clays
    State Key Laboratory of Coastal and Offshore Engineering, China Centre for Offshore Foundation Systems, University of Western Australia, Australia
    不详
    不详
    Proc Int Offshore Polar Eng Conf, (689-693):
  • [5] Contribution to the analysis of the bearing capacity of tunnels excavated in soil
    Garcia, Jean Rodrigo
    De Albuquerque, Paulo José Rocha
    De Araújo Melo, Rodrigo Álvares
    Ciencia y Engenharia/ Science and Engineering Journal, 2017, 26 (01): : 9 - 15
  • [6] Numerical limit analysis on the seismic bearing capacity of anti-liquefaction ground
    Department of Civil and Structural Engineering, Graduate School of Engineering, Kyushu University, 744 Motooka, Nishi-ku, Fukuoka 819-0395, Japan
    不详
    Geotech. Soc. Singap. - Ground Improv. Technol. Case Hist., (411-417):
  • [7] TRANSIENT CONVECTIVE HEAT-TRANSFER TO TURBULENT-FLOW FROM A FLAT-PLATE WITH CONSTANT HEAT-CAPACITY (NUMERICAL-ANALYSIS)
    HANAWA, J
    BULLETIN OF THE JSME-JAPAN SOCIETY OF MECHANICAL ENGINEERS, 1981, 24 (187): : 124 - 130