The technical study on cylinder cam machining

被引：0
|
作者：
Yuan, Guangming [1 ]
Liu, Lei [1 ]
Wang, Haochen [1 ]
Jiao, Xuejian [1 ]
Yin, Zhanmin [1 ]
机构：
[1] School of Mechnical Engineering, Shandong University of Technology
来源：
Key Engineering Materials | 2009年 / 407-408卷
关键词：
CNC programming; Compensation of cutting tool's radius; Cylinder cam; Machining;
D O I：
10.4028/www.scientific.net/KEM.407-408.99
中图分类号：
学科分类号：
摘要：
Worm cam mechanism is a common indexing mechanism which is widely used in automatic machinery. Because of its high transmission precision requirements, the mechanism has high demands on the cylinder cam. The machining methods of cylinder cam are unique and the methods of special machine tool and NC machining are the two methods that general adopted in the machining of it. In this paper, the method of CNC Programming which is used for machining cylinder cam in 5-axeses high speed DMU 70eVolution Machining Center is introduced. The machining principle of cylinder cam has been studied, and the mathematical model for CNC Programming has also been worked out. The automated compensation of cutting tool's radius is used in this field for the first time. © (2009) Trans Tech Publications.
引用
收藏
页码：99 / 102
页数：3
相关论文
共 50 条
  • [41] An experimental study to enhance the cutting performance in abrasive waterjet machining
    Wang, J
    Kuriyagawa, T
    Huang, CZ
    MACHINING SCIENCE AND TECHNOLOGY, 2003, 7 (02) : 191 - 207
  • [42] Sustainable Cooling and Lubrication Strategies in Machining Processes: A Comparative Study
    Hegab, H.
    Kishawy, H. A.
    Darras, B.
    SUSTAINABLE MANUFACTURING FOR GLOBAL CIRCULAR ECONOMY, 2019, 33 : 786 - 793
  • [43] A Finite Element Study of Chip Formation Process in Orthogonal Machining
    Priyadarshini, Amrita
    Pal, Surjya K.
    Samantaray, Arun K.
    INTERNATIONAL JOURNAL OF MANUFACTURING MATERIALS AND MECHANICAL ENGINEERING, 2011, 1 (04) : 19 - 45
  • [44] Instrumented clamping device and numerical simulations to study machining distortion
    Cherif, Iheb
    Cotton, Dominique
    Poulachon, Gerard
    Outeiro, Jose
    Brosse, Alexandre
    Rebelo Kornmeier, Joana
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2019, 105 (7-8) : 3093 - 3103
  • [45] Thermoelectric cooling for machining of In 825 superalloy-an experimental study
    Prabakaran, Jayaprakash
    David, Arulkirubakaran
    Russel, Malkiya Rasalin Prince
    Immanuel, Darwin
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2024, 130 (9-10) : 4387 - 4396
  • [46] Study of the jet-flow rate of cooling in machining .2. Simulation study
    Li, XP
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 1996, 62 (1-3) : 157 - 165
  • [47] Study of High Speed Machining by Using Split Hopkinson Pressure Bar
    Larbi, Said
    Djebali, Said
    Bilek, Ali
    ICSI 2015 THE 1ST INTERNATIONAL CONFERENCE ON STRUCTURAL INTEGRITY FUNCHAL, 2015, 114 : 314 - 321
  • [48] Study on high efficiency machining with reaction-free shuttle unit
    Ebihara, Kenzo
    Yamamoto, Akira
    Kawm, Tomohiko
    Takeuchl, Yoshimi
    Seimitsu Kogaku Kaishi/Journal of the Japan Society for Precision Engineering, 2007, 73 (02): : 220 - 225
  • [49] Machining feasibility and sustainability study on end milling process of Monel alloy
    Shihan, Muhammed
    Chandradass, J.
    Kannan, T. T. M.
    Sivagami, S. M.
    MATERIALS TODAY-PROCEEDINGS, 2021, 45 : 7162 - 7165
  • [50] STUDY OF HIGH SPEED MACHINING BY USING SPLIT HOPKINSON PRESSURE BAR
    Larbi, S.
    Djebali, S.
    Bilek, A.
    M2D2015: PROCEEDINGS OF THE 6TH INTERNATIONAL CONFERENCE ON MECHANICS AND MATERIALS IN DESIGN, 2015, : 579 - 580
12345