The technical study on cylinder cam machining

被引：0
|
作者：
Yuan, Guangming [1 ]
Liu, Lei [1 ]
Wang, Haochen [1 ]
Jiao, Xuejian [1 ]
Yin, Zhanmin [1 ]
机构：
[1] School of Mechnical Engineering, Shandong University of Technology
来源：
Key Engineering Materials | 2009年 / 407-408卷
关键词：
CNC programming; Compensation of cutting tool's radius; Cylinder cam; Machining;
D O I：
10.4028/www.scientific.net/KEM.407-408.99
中图分类号：
学科分类号：
摘要：
Worm cam mechanism is a common indexing mechanism which is widely used in automatic machinery. Because of its high transmission precision requirements, the mechanism has high demands on the cylinder cam. The machining methods of cylinder cam are unique and the methods of special machine tool and NC machining are the two methods that general adopted in the machining of it. In this paper, the method of CNC Programming which is used for machining cylinder cam in 5-axeses high speed DMU 70eVolution Machining Center is introduced. The machining principle of cylinder cam has been studied, and the mathematical model for CNC Programming has also been worked out. The automated compensation of cutting tool's radius is used in this field for the first time. © (2009) Trans Tech Publications.
引用
收藏
页码：99 / 102
页数：3
相关论文
共 50 条
  • [21] Possibilities of rotary ultrasonic machining in order to give a boost to technical ceramics in the actual Spanish market
    Arriola, I.
    Gonzalo, O.
    Bengoetxea, Y. I.
    BOLETIN DE LA SOCIEDAD ESPANOLA DE CERAMICA Y VIDRIO, 2012, 51 (04): : 191 - 200
  • [22] Study on prediction of surface quality in machining process
    Lu, Chen
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2008, 205 (1-3) : 439 - 450
  • [23] Experience and Study of Austenitic Stainless Steel Machining
    Tu, Zhenxiang
    ADVANCED RESEARCH ON ARCHITECTONICS AND MATERIALS, 2012, 511 : 88 - 91
  • [24] A study on the machining characteristics using plasma assisted machining of AISI 1045 steel and Inconel 718
    Moon, Sung-Ho
    Lee, Choon-Man
    INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, 2018, 142 : 595 - 602
  • [25] Technical committee for machining of difficult-to-cut materials of JSPE - Machining of difficult-to-cut materials and report of 1st international conference on machining, materials and mechanical technologies (IC3MT)
    Usuki, Hiroshi
    Ochi, Akio
    Seimitsu Kogaku Kaishi/Journal of the Japan Society for Precision Engineering, 2015, 81 (10): : 893 - 898
  • [26] STUDY ON ACHIEVEMENT EVALUATION OF ROBOT MACHINING BY FEEDBACK CONTROL
    Nakamura Y.
    Hirasawa G.
    AIJ Journal of Technology and Design, 2022, 28 (70) : 1607 - 1612
  • [27] A comparison study of surface hardening by grinding versus machining
    Liu, ZQ
    Ai, X
    Wang, ZH
    ADVANCES IN GRINDING AND ABRASIVE TECHNOLOGY XIII, 2006, 304-305 : 156 - 160
  • [28] Study on Machining Face gears with An Elliptical Sphericity Hob
    Zhang, Shuyan
    Cheng, Bin
    Lei, Guangming
    Guo, Hui
    PROCEEDINGS OF THE THIRD INTERNATIONAL CONFERENCE ON MECHANICAL ENGINEERING AND MECHANICS, VOLS 1 AND 2, 2009, : 1875 - 1880
  • [29] Thermoelectric cooling for machining of In 825 superalloy—an experimental study
    Jayaprakash Prabakaran
    Arulkirubakaran David
    Malkiya Rasalin Prince Russel
    Darwin Immanuel
    The International Journal of Advanced Manufacturing Technology, 2024, 130 : 4387 - 4396
  • [30] Study on the machining mechanism of WEDM with ultrasonic vibration of the wire
    Guo, ZN
    Lee, TC
    Yue, TM
    Lau, WS
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 1997, 69 (1-3) : 212 - 221
12345