Study on Pre-Oxidized Carbon Fiber Reinforced Pantograph Carbon Slide Plates

被引：0
|
作者：
Zhao Y. [1 ]
Li J. [1 ]
Yang Z. [1 ]
Gao G. [1 ]
Wei W. [1 ]
Wu G. [1 ]
机构：
[1] School of Electrical Engineering, Southwest Jiaotong University, Chengdu
来源：
Tiedao Xuebao/Journal of the China Railway Society | 2024年 / 46卷 / 06期
关键词：
composites; electrical and thermal conductivity properties; mechanical properties; pantograph carbon slide plates; pre-oxidized carbon fiber;
D O I：
10.3969/j.issn.1001-8360.2024.06.006
中图分类号：
学科分类号：
摘要：
The pre-oxidized carbon fiber reinforced pantograph carbon slide plate was prepared using processes such as hot pressing and calcination with pre-oxidized carbon fibers(OPF), pitch and coke as raw materials. The electrical and thermal conductivity as well as the mechanical properties of the pantograph carbon slide plates with different OPF contents were disscussed, and the microstructure of the composite material was observed with the scanning electron microscopy (SEM), polarized light microscopy (POM), X-ray diffractometer (XRD) and other instruments. The results show that the improvement of properties of slide plate material is related to the co-carbonized interface between the OPF and pitch and the formation of microcrystalline network at the interface and the substrate. The composite material consisting of 1. 5% OPF has good electrical, thermal conductivity and mechanical properties with electrical and thermal conductivity of 279. 33 S/cm and 3. 37 W/(m• K), compressive and flexural strength of 155. 00 MPa and 44. 85 MPa respectively, which meet the performance requirements of pantograph carbon slide plates. © 2024 Science Press. All rights reserved.
引用
收藏
页码：56 / 64
页数：8
相关论文
共 44 条
  • [1] PAN Lianming, ZHANG Guorong, QIAN Zhongliang, Et al., Pantograph Slide Plates for Electric Locomotive[J], Locomotive & Rolling Stock Technology, 3, (2001)
  • [2] Kubo SHUNICHI, Development of Carbon Pantograph Slide Plate [J], Foreign Locomotive & Rolling Stock Technology, 5, pp. 4-6, (2000)
  • [3] QIAN Zhongliang, SHENG Wei, ZHANG Zhimiao, Et al., Development of Carbon Contact Strips and Research Progress in China[J], Electric Drive for Locomotives, pp. 5-8, (2003)
  • [4] HAN Weifeng, GAO Guoqiang, LIU Xianrui, Et al., MHD Model of Pantograph-catenary Arc [J], Journal of the China Railway Society, 37, 5, pp. 21-26, (2015)
  • [5] WU Jiqin, Occurrence of Arc in Pantograph and Overhead Contact System and Its Interference [J], Electric Railway, 19, 2, pp. 27-29, (2008)
  • [6] ZHANG D F, HILL M, MCBRIDE J W., Evaluation of the Volumetric Erosion of Spherical Electrical Contacts Using the Defect Removal Method [J], IEEE Transactions on Components and Packaging Technologies, 29, 4, pp. 711-717, (2006)
  • [7] ZHOU Yue, WEI Wenfu, GAO Guoqiang, Et al., Characteristics of Temperature Rise of Pantograph Strip in Electric Contact System between Pantograph and Catenary [J], Journal of the China Railway Society, 41, 6, pp. 74-80, (2019)
  • [8] WANG Wangang, WU Guangning, GAO Guoqiang, Et al., Characteristics of Contact Resistance between Pantograph and Catenary System [J], Journal of Central South University (Science and Technology), 43, 10, pp. 18-23, (2012)
  • [9] JIANG Wenzhong, Physics and Chemistry of Carbon and Graphite [M], (1996)
  • [10] QIU Haipeng, GUO Quangui, SONG Yongzhong, Et al., Study of the Relationship between Thermal Conductivity and Microcrystalline Parameters of Bulk Graphite [J], New Carbon Materials, 17, 1, pp. 36-40, (2002)
12345