共 20 条
[1]
Seabra M., Azevedo J., Araujo A., Reis L., Pinto E., Alves N., Santos R., Mortagua J.P., Selective laser melting（SLM）and topology optimization for lighter aerospace components, Procedia Struct. Integr., 1, pp. 289-296, (2016)
[2]
Gebisa A.W., Lemu H.G., A case study on topology optimized design for additive manufacturing, IOP Conf. Series: Materials Science and Engineering, 276, (2017)
[3]
Xiao Z., Yang Y., Wang D., Song C., Bai Y., Structural optimization design for antenna bracket manufactured by selective laser melting, Rapid Prototyping J, 24, pp. 539-547, (2018)
[4]
Additive Manufacturing-Design-Part 1: Laser-Based Powder Bed Fusion of Metals
[5]
Liu J., Gaynor A.T., Chen S., Kang Z., Suresh K., Takezawa A., Li L., Kato J., Tang J., Wang C.C.L., Cheng L., Liang X., To A.C., Current and future trends in topology optimization for additive manufacturing, Struct. Multidisc. Optim., 57, pp. 2457-2483, (2018)
[6]
Hollister S.J., Porous scaffold design for tissue engineering, Nat. Mater., 4, pp. 518-524, (2005)
[7]
Schwerdtfeger J., Wein F., Leugering G., Singer R.F., Korner C., Stingl M., Schury F., Design of auxetic structures via mathematical optimization, Adv. Mater., 23, pp. 2650-2654, (2011)
[8]
Andreassen E., Lazarov B.S., Sigmund O., Design of manufacturable 3D extremal elastic microstructure, Mech. Mater., 69, pp. 1-10, (2014)
[9]
Takezawa A., Kobashi M., Kitamura M., Porous composite with negative thermal expansion obtained by photopolymer additive manufacturing, APL Mater, 3, (2015)
[10]
Takezawa A., Koizumi Y., Kobashi M., High-stiffness and strength porous maraging steel via topology optimization and selective laser melting, Addit. Manufact., 18, pp. 194-202, (2017)