Charged uniform molten metal droplet spray as a rapid prototyping technology

被引：1
作者：
Gao, S.D. [1 ]
Lu, Y. [1 ]
Yao, Y.X. [1 ]
机构：
[1] School of Mechatronics Engineering, Harbin Institute of Technology
来源：
Key Engineering Materials | 2012年 / 499卷
关键词：
Rapid prototyping; Trajectory control; Uniform metal droplet;
D O I：
10.4028/www.scientific.net/KEM.499.195
中图分类号：
学科分类号：
摘要：
Uniform molten metal droplet stream from jet break-up provides potential technology for metal parts rapid prototype manufacturing. In this study an experimental device capable of producing uniform metal droplet stream has been developed. Monosize spherical powders of 180?m in diameter can be obtained after cooling and solidification. Then the droplets were electrostatically charged and deflected during flight to deposit onto a revolving substrate to form a 3D metal part. © (2012) Trans Tech Publications, Switzerland.
引用
收藏
页码：195 / 199
页数：4
相关论文
共 11 条
  • [1] Waterman N.A., Dickens P., World Class Design to Manufacture, 3, (1994)
  • [2] Yao Y.X., Gao S.D., Cui C.S., Int. J. of Materials Processing Technology, 146, 3, (2004)
  • [3] Hsiao W.K., Chun J.H., Saka N., CIRP Annals - Manufacturing Technology, 55, 1, (2006)
  • [4] Pillai S.K., Ando T., International Journal of Thermal Sciences, 48, 8, (2009)
  • [5] Chen C.A., Acquaviva P., Chun J.H., Ando T., Scripta Materialia, 34, 5, (1996)
  • [6] Orme M., Liu Q., Courter J., Smith R., Physics of Fluids Journal, 12, 9
  • [7] Liu Q., Huang C., Orme M., Journal of Atomization and Sprays, 10, 6, (2000)
  • [8] Fillmore G.L., Buehner W.L., Ink Jet Printer [J] . Ibm. J. Res. Develop, 1, (1977)
  • [9] Gao S.D., Yao Y.X., Cui C.S., J. of Materials Science and Technology, 23, 1, (2007)
  • [10] Gao S.D., Yao Y.X., Cui C.S., Journal of Harbin Institute of Technology, 12, SUPPL. 2, (2005)
12