Multi-axial fatigue properties and life prediction under proportional and non-proportional loading at high temperature

被引：0

作者：

Wang, Jianguo ^{[1
]}

Liu, Lingling ^{[2
]}

Wang, Lianqing ^{[1
]}

Kang, Yonglin ^{[1
]}

Shang, Deguang ^{[3
]}

机构：

[1] State Key Laboratory for Advanced Metals and Materials, University of Science and Technology Beijing, Beijing 100083, China

[2] Shijiazhuang Railway Institute, Shijiazhuang 050043, China

[3] College of Mechanical Engineering and Applied Electronics Technology, Beijing University of Technology, Beijing 100022, China

来源：

Beijing Keji Daxue Xuebao/Journal of University of Science and Technology Beijing | 2006年 / 28卷 / 05期

关键词：

Fatigue of materials - Fatigue testing - Forecasting - High temperature testing - Loading - Shear stress - Superalloys - Torsional stress;

D O I：

暂无

中图分类号：

学科分类号：

摘要：

The multiaxial fatigue behavior of the notched specimens and thin wall tube specimens of GH4169 super alloy was investigated. Symmetric axial-torsional strain was controlled in fatigue tests at a high temperature of 650°C by using a MTS 809 tension-torsional servo-controlled electro-hydraulic testing machine with proportional and non-proportional loading. The phases between axial strain and torsional strain were 0° in-phase (proportional) and 45°, 90° out-of-phase (non-proportional) respectively. Based on the critical approach, a model for multiaxial fatigue life prediction was established by combining maximum shear strain and normal strain on the critical plane, and the effect of stress state under the multiaxial cyclic loading condition on the fatigue life was taken into account. The results of life prediction show that the new fatigue life prediction model is validated with the experimental.

引用

页码：448 / 453

共 50 条

[31] Criteria evaluation for fatigue life estimation under proportional and non-proportional loadings
Pejkowski, Lukasz
Skibicki, Dariusz
FATIGUE FAILURE AND FRACTURE MECHANICS, 2012, 726 : 189 - 192
[32] Multiaxial fatigue life and strength criteria for non-proportional loading
Skibicki, D
MATERIALPRUFUNG, 2006, 48 (03): : 99 - 102
[33] MULTIAXIAL FATIGUE IN DRILL PIPES UNDER NON-PROPORTIONAL LOADING
Helmy, Nahla A.
Younan, Maher Y. A.
PROCEEDINGS OF THE ASME PRESSURE VESSELS AND PIPING CONFERENCE, 2017, VOL 5, 2017,
[34] A new life prediction model for multiaxial fatigue under proportional and non-proportional loading paths based on the pi-plane projection
Zhong, Bo
Wang, Yanrong
Wei, Dasheng
Wang, Jialiang
INTERNATIONAL JOURNAL OF FATIGUE, 2017, 102 : 241 - 251
[35] Evaluation of low cycle fatigue under non-proportional loading
Chen, X
Gao, Q
Abel, A
Wu, S
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, 1996, 19 (10) : 1161 - 1168
[36] Low-cycle fatigue under non-proportional loading
Tianjin Univ, Tianjin, China
Fatigue Fract Eng Mater Struct, 7 (839-854):
[37] Low-cycle fatigue under non-proportional loading
Chen, X
Gao, Q
Sun, XF
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, 1996, 19 (07) : 839 - 854
[38] Development of a multiaxial fatigue damage parameter and life prediction methodology for non-proportional loading
Suman, Sandip
Kallmeyer, Alan
Smith, John
FRATTURA ED INTEGRITA STRUTTURALE, 2016, (38): : 224 - 230
[39] Ductile fracture under proportional and non-proportional multiaxial loading
Baral, Madhav
Korkolis, Yannis P.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, 2021, 210 : 88 - 108
[40] Study on low cycle fatigue of Ni-based single crystal alloy under multi-axial non-proportional loading based on grey theory
Chen, Jiping
Ding, Zhiping
Zeng, Jun
Bai, Xiaopeng
Wang, Weifeng
Jixie Gongcheng Xuebao/Journal of Mechanical Engineering, 2014, 50 (24): : 66 - 72

← 1 2 3 4 5 →