Sol-gel-derived alumina/polyvinylpyrrolidone hybrid nanocomposite film on metal for corrosion resistance

被引:0
|
作者
Jing, Chengbin [1 ]
Hou, Jinxia [1 ]
机构
[1] College of Materials and Engineering, Qingdao University of Science and Technology, Qingdao 266042, China
来源
Journal of Applied Polymer Science | 2007年 / 105卷 / 02期
关键词
With the addition of polyvinylpyrrolidone (PVP); alumina sol with an aluminum sec-butoxide/water molar ratio of 1 : 45 was synthesized. The surface tension of this alumina sol was found to be lower by 35% than the sol without PVP. Alumina/PVP hybrid film with a critical thickness up to 2 μm was fabricated by dip-coating method. The heat treatment between 200 and 300°C could produce a film with perfect hybrid nanocomposite structures. Alumina particles with a size of about 20 nm were uniformly distributed in this material. The hardness of the film samples increased with the increment of heat treatment temperature; and hardness values higher than the original metal were detected after heat treated above 400°C. The film-coated metals that were heat treated below 150°C or above 400°C exhibited relatively weak adhesion; but strong adhesion was obtained when heat treated between 200 and 300°C for 30 min. The corrosion rate of the film-coated metal that was heat treated between 200°C and 300°C for 30 min was lower by 95% than the uncoated metal. © 2007 Wiley Periodicals; Inc;
D O I
暂无
中图分类号
学科分类号
摘要
Journal article (JA)
引用
收藏
页码:697 / 705
相关论文
共 50 条
  • [31] Sol-gel-derived organic-inorganic hybrid materials
    Han, Yung-Hoe
    Taylor, Alan
    Mantle, Mick D.
    Knowles, Kevin M.
    JOURNAL OF NON-CRYSTALLINE SOLIDS, 2007, 353 (03) : 313 - 320
  • [32] Hybrid sol-gel-derived polymers: Applications of multifunctional materials
    Schottner, G
    CHEMISTRY OF MATERIALS, 2001, 13 (10) : 3422 - 3435
  • [33] Improving wear resistance of aluminum by hydrophobic sol-gel-derived TiO2 film
    Zhao, Hongjin
    Cao, Lei
    Wan, Yong
    Yang, Shuyan
    Gao, Jianguo
    Pu, Jibin
    INDUSTRIAL LUBRICATION AND TRIBOLOGY, 2018, 70 (08) : 1408 - 1413
  • [34] Corrosion resistance of sol–gel alumina coated Mg metal in 3.5 % NaCl solution
    I. B. Singh
    Prasant Gupta
    Arpit Maheshwari
    Naveen Agrawal
    Journal of Sol-Gel Science and Technology, 2015, 73 : 127 - 132
  • [35] Sol-Gel-Derived Single-Crystal Alumina Coatings with Vermicular Structure
    Dutta, Sreya
    Kim, Taek Bo
    Krentz, Timothy
    Vinci, Richard P.
    Chan, Helen M.
    JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 2011, 94 (02) : 340 - 343
  • [36] Adsorption equilibrium and kinetics of fluoride on sol-gel-derived activated alumina adsorbents
    Camacho, Lucy M.
    Torres, Arely
    Saha, Dipendu
    Deng, Shuguang
    JOURNAL OF COLLOID AND INTERFACE SCIENCE, 2010, 349 (01) : 307 - 313
  • [37] Dynamic instability of a sol-gel-derived thin film: Dewetting and dynamics
    Kwon, S. Joon
    Park, Jae-Gwan
    ABSTRACTS OF PAPERS OF THE AMERICAN CHEMICAL SOCIETY, 2007, 233
  • [38] Reactive ion etching of sol-gel-derived BST thin film
    Shi, P
    Yao, X
    Zhang, LY
    CERAMICS INTERNATIONAL, 2004, 30 (07) : 1513 - 1516
  • [39] Sol-gel-derived thin-film manganese dioxide cathodes
    Stadniychuk, HP
    Anderson, MA
    Chapman, TW
    JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 1996, 143 (05) : 1629 - 1632
  • [40] Passivation of metal alloys using sol-gel-derived materials - a review
    Metroke, TL
    Parkhill, RL
    Knobbe, ET
    PROGRESS IN ORGANIC COATINGS, 2001, 41 (04) : 233 - 238