Reactive compatibilization of polyamide 6/polyethylene nonwoven based thermoplastic composites

被引：0
|
作者：
机构：
[1] Dasdemir, Mehmet
[2] Maze, Benoit
[3] Anantharamaiah, Nagendra
[4] Pourdeyhimi, Behnam
来源：
Dasdemir, Mehmet | 1600年 / Elsevier Ltd卷 / 63期
关键词：
The interface of polyamide 6/polyethylene (PA6/PE) was altered with compatibilizers in an effort to promote adhesion between PA6 reinforcement and PE matrix in nonwoven based thermoplastic composites. The compatibilizers chosen were triblock copolymer of styrene and ethylene/butylene (SEBS) and maleic anhydride (MA) functionalized SEBS with 1 wt% (SEBS-g-MA1) and 2 wt% (SEBS-g-MA2) MA contents. The interfacial adhesion in PA6/PE + Compatibilizer laminates was characterized using asymmetric double cantilever beam (ADCB) test. The effects of compatibilizer type; functional group content and concentration on the interfacial fracture toughness were determined. Also; the influence of lamination temperature and time on the interface enhancement was studied. After performing the compatibilization at composite fabrication stage; tensile responses of PA6/PE composites were greatly improved in the presence of functional compatibilizers. The best improvement on the overall tensile properties was achieved with SEBS-g-MA2 at the lowest compatibilizer concentration level of 2 wt%. The examination of fractured surfaces showed the clear evidence of the enhanced adhesion of matrix polymer to reinforcement fiber for the composites including SEBS-g-MA1 and SEBS-g-MA2. These results suggest that reactive compatibilization was achieved during composite fabrication stage and improved the adhesion between PA6 and PE resulting in a higher load transfer and better mechanical properties. © 2014 Elsevier Ltd. All rights reserved;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
引用
收藏
相关论文
共 50 条
  • [41] Compatibilization of polypropylene polyethylene terephthalate blends and composites
    McLoughlin, KM
    Elliott, SJ
    Townsend, EB
    ANTEC '99: PLASTICS BRIDGING THE MILLENNIA, CONFERENCE PROCEEDINGS, VOLS I-III: VOL I: PROCESSING; VOL II: MATERIALS; VOL III: SPECIAL AREAS;, 1999, : 2776 - 2780
  • [42] Reactive blends of functionalized ultra low density polyethylene and polyamide 6
    Sanchez, A
    Rosales, C
    Muller, AJ
    ANTEC'97 - PLASTICS SAVING PLANET EARTH, CONFERENCE PROCEEDINGS, VOLS 1 - 3, 1997, : 3761 - 3765
  • [43] High performance polyamide 6 composites prepared by reactive extrusion
    Shao, Hui-Ju
    Wu, Bin
    Guo, Jian-Bing
    Qin, Shu-Hao
    Lu, Sheng-Jun
    POLYMER COMPOSITES, 2014, 35 (05) : 985 - 992
  • [44] Influence of compatibilization and viscosity ratio on the barrier and impact properties of blends of a modified polyamide-6 and polyethylene
    Yeh, JT
    Jyan, CF
    Yang, SS
    Chou, S
    POLYMER ENGINEERING AND SCIENCE, 1999, 39 (10): : 1952 - 1961
  • [45] Polypropylene/polyamide 6,6 blends: Reactive compatibilization with maleated polypropylene as compared to the addition of polypropylene-polyamide 6,6 copolymer addition.
    Champagne, MF
    Helmert, A
    Dumoulin, MM
    ABSTRACTS OF PAPERS OF THE AMERICAN CHEMICAL SOCIETY, 2000, 220 : U374 - U374
  • [46] Abrasive wear effect on Polyethylene, Polyamide 6 and polymeric particle composites
    Department of Material Science and Manufacturing Technology, Faculty of Engineering, Czech University of Life Science, Czech Republic
    Manuf. Technol., 2012, (55-59):
  • [47] Influences of hyperbranched polyethylenimine on the reactive compatibilization of polycarbonate/polyamide blends
    Wang, Ming-ji
    Yuan, Guang-cui
    Han, Charles C.
    CHINESE JOURNAL OF POLYMER SCIENCE, 2015, 33 (04) : 652 - 660
  • [48] New flame-retardant thermoplastic Composites with a Polyamide 6-Matrix
    不详
    KGK-KAUTSCHUK GUMMI KUNSTSTOFFE, 2021, 74 (01): : 55 - 55
  • [49] Enhanced properties of polylactide/polyamide 11 blends by reactive compatibilization
    Mousavi, Zeinab
    Heuzey, Marie-Claude
    Randall, Jed
    Carreau, Pierre J.
    CANADIAN JOURNAL OF CHEMICAL ENGINEERING, 2022, 100 (09): : 2475 - 2490
  • [50] Influences of Hyperbranched Polyethylenimine on the Reactive Compatibilization of Polycarbonate/Polyamide Blends
    Ming-ji Wang
    袁光萃
    韩志超
    Chinese Journal of Polymer Science, 2015, 33 (04) : 652 - 660
12345