Reactive compatibilization of polyamide 6/polyethylene nonwoven based thermoplastic composites

被引：0

作者：

机构：

[1] Dasdemir, Mehmet

[2] Maze, Benoit

[3] Anantharamaiah, Nagendra

[4] Pourdeyhimi, Behnam

来源：

Dasdemir, Mehmet | 1600年 / Elsevier Ltd卷 / 63期

关键词：

The interface of polyamide 6/polyethylene (PA6/PE) was altered with compatibilizers in an effort to promote adhesion between PA6 reinforcement and PE matrix in nonwoven based thermoplastic composites. The compatibilizers chosen were triblock copolymer of styrene and ethylene/butylene (SEBS) and maleic anhydride (MA) functionalized SEBS with 1 wt% (SEBS-g-MA1) and 2 wt% (SEBS-g-MA2) MA contents. The interfacial adhesion in PA6/PE + Compatibilizer laminates was characterized using asymmetric double cantilever beam (ADCB) test. The effects of compatibilizer type; functional group content and concentration on the interfacial fracture toughness were determined. Also; the influence of lamination temperature and time on the interface enhancement was studied. After performing the compatibilization at composite fabrication stage; tensile responses of PA6/PE composites were greatly improved in the presence of functional compatibilizers. The best improvement on the overall tensile properties was achieved with SEBS-g-MA2 at the lowest compatibilizer concentration level of 2 wt%. The examination of fractured surfaces showed the clear evidence of the enhanced adhesion of matrix polymer to reinforcement fiber for the composites including SEBS-g-MA1 and SEBS-g-MA2. These results suggest that reactive compatibilization was achieved during composite fabrication stage and improved the adhesion between PA6 and PE resulting in a higher load transfer and better mechanical properties. © 2014 Elsevier Ltd. All rights reserved;

D O I：

暂无

中图分类号：

学科分类号：

摘要：

引用

共 50 条

[31] IR spectrophotometric studies on the compatibilization process of low-density polyethylene polyamide 6 blends
Kelar, K
POLIMERY, 1999, 44 (02) : 131 - 137
[32] Binary and ternary blends of polyethylene, polypropylene, and polyamide 6,6:: The effect of compatibilization on the morphology anal rheology
Krache, R
Benachour, D
Pötschke, P
JOURNAL OF APPLIED POLYMER SCIENCE, 2004, 94 (05) : 1976 - 1985
[33] Reactive compatibilization of polypropylene polyethylene terephthalate blends
Champagne, MF
Huneault, MA
Roux, C
Peyrel, W
POLYMER ENGINEERING AND SCIENCE, 1999, 39 (06): : 976 - 984
[34] Compatibilization of polyethylene polyamide 6 blends with oxazoline-functionalized polyethylene and styrene ethylene butylene styrene copolymer (SEBS)
Vocke, C
Anttila, U
Seppälä, J
JOURNAL OF APPLIED POLYMER SCIENCE, 1999, 72 (11) : 1443 - 1450
[35] Compatibilization of polycarbonate/polyamide-6 blends
Arjunan, P
Sangani, H
Natarajan, KM
ABSTRACTS OF PAPERS OF THE AMERICAN CHEMICAL SOCIETY, 1996, 212 : 191 - PMSE
[36] A Study on the Polyamide Based Thermoplastic Composites for Fuel Cell Separators
Lee, Kwang-Yong
Kim, Jeong-Heon
Ryu, Sung Hun
ELASTOMERS AND COMPOSITES, 2008, 43 (04): : 253 - 258
[37] Influence of composition and compatibilization on rheological properties of polyethylene/polyamide blends
Huitric, J
Mederic, P
Moan, M
Jarrin, J
POLYBLENDS '97 / SPE RETEC: INTERNATIONAL SYMPOSIUM ON POLYMER BLENDS, ALLOYS AND FILLED SYSTEMS, 1997, : 674 - 683
[38] Microfibrillar composites based on polyamide/polyethylene blends. 1. Structure investigations in oriented and isotropic polyamide 6
Dencheva, N
Nunes, T
Oliveira, AJ
Denchev, Z
POLYMER, 2005, 46 (03) : 887 - 901
[39] The reactive compatibilization of montmorillonite for immiscible anionic polyamide 6/polystyrene blends via in situ polymerization
Ding, Weijie
Zhou, Yunfei
Wang, Wenqi
Wang, Jikui
POLYMER-PLASTICS TECHNOLOGY AND MATERIALS, 2020, 59 (08): : 884 - 894
[40] Reactive compatibilization of polyamide-6 (PA 6)/polybutylene terephthalate (PBT) blends by a multifunctional epoxy resin
Chiou, KC
Chang, FC
JOURNAL OF POLYMER SCIENCE PART B-POLYMER PHYSICS, 2000, 38 (01) : 23 - 33

← 1 2 3 4 5 →