Reactive compatibilization of polyamide 6/polyethylene nonwoven based thermoplastic composites

被引：0

作者：

机构：

[1] Dasdemir, Mehmet

[2] Maze, Benoit

[3] Anantharamaiah, Nagendra

[4] Pourdeyhimi, Behnam

来源：

Dasdemir, Mehmet | 1600年 / Elsevier Ltd卷 / 63期

关键词：

The interface of polyamide 6/polyethylene (PA6/PE) was altered with compatibilizers in an effort to promote adhesion between PA6 reinforcement and PE matrix in nonwoven based thermoplastic composites. The compatibilizers chosen were triblock copolymer of styrene and ethylene/butylene (SEBS) and maleic anhydride (MA) functionalized SEBS with 1 wt% (SEBS-g-MA1) and 2 wt% (SEBS-g-MA2) MA contents. The interfacial adhesion in PA6/PE + Compatibilizer laminates was characterized using asymmetric double cantilever beam (ADCB) test. The effects of compatibilizer type; functional group content and concentration on the interfacial fracture toughness were determined. Also; the influence of lamination temperature and time on the interface enhancement was studied. After performing the compatibilization at composite fabrication stage; tensile responses of PA6/PE composites were greatly improved in the presence of functional compatibilizers. The best improvement on the overall tensile properties was achieved with SEBS-g-MA2 at the lowest compatibilizer concentration level of 2 wt%. The examination of fractured surfaces showed the clear evidence of the enhanced adhesion of matrix polymer to reinforcement fiber for the composites including SEBS-g-MA1 and SEBS-g-MA2. These results suggest that reactive compatibilization was achieved during composite fabrication stage and improved the adhesion between PA6 and PE resulting in a higher load transfer and better mechanical properties. © 2014 Elsevier Ltd. All rights reserved;

D O I：

暂无

中图分类号：

学科分类号：

摘要：

引用

共 50 条

[1] Reactive compatibilization of polyamide 6/polyethylene nonwoven based thermoplastic composites
Dasdemir, Mehmet
Maze, Benoit
Anantharamaiah, Nagendra
Pourdeyhimi, Behnam
EUROPEAN POLYMER JOURNAL, 2015, 63 : 194 - 206
[2] Compatibilization of a Polyethylene/Polyamide 6 Blend Nanocomposite
Mistretta, M. C.
Ceraulo, M.
La Mantia, F. P.
Morreale, M.
TIMES OF POLYMERS (TOP) AND COMPOSITES 2014, 2014, 1599 : 434 - 437
[3] The effect of compatibilization in the reactive processing of the low density polyethylene/polyamide 6/EPDM blends
Darie, Raluca Nicoleta
Vasile, Cornelia
Kozlowski, Marek
POLIMERY, 2006, 51 (09) : 656 - 661
[4] Compatibilization of polyethylene/polyamide 6 blend nanocomposite films
Mistretta, M. C.
Ceraulo, M.
La Mantia, F. P.
Morreale, M.
POLYMER COMPOSITES, 2015, 36 (06) : 992 - 998
[5] Reactive compatibilization of polyester elastomer/polyamide 6 blends with oxazoline functionalized low-density polyethylene
Jeziórska, R
POLIMERY, 2005, 50 (04) : 291 - 297
[6] Influence of In Situ Compatibilization on In Situ Formation of Low-Density Polyethylene/Polyamide 6 Blends by Reactive Extrusion
Fang, Hui
Yang, Guisheng
JOURNAL OF APPLIED POLYMER SCIENCE, 2010, 116 (05) : 3027 - 3034
[7] Compatibilization of Polyamide 6/Cyclic Olefinic Copolymer Blends for the Development of Multifunctional Thermoplastic Composites with Self-Healing Capability
Perin, Davide
Dorigato, Andrea
Pegoretti, Alessandro
MATERIALS, 2024, 17 (08)
[8] Plasma-Induced Reactive Compatibilization of Polypropylene/Polyamide 6 Blends
Ashraf, Jesna
Bertin, Maicon
Verbeek, Casparus Johannes Reinhard
ACS APPLIED POLYMER MATERIALS, 2025, 7 (02): : 641 - 653
[9] Reactive processing of thermoplastic elastomers based on polyamide-6: preparation and characterization
Jiang, Liang
Kong, Weibo
Wu, Bo
Fu, Xiaowei
Xiao, Yao
Zhou, Changlin
IRANIAN POLYMER JOURNAL, 2016, 25 (09) : 765 - 773
[10] Reactive processing of thermoplastic elastomers based on polyamide-6: preparation and characterization
Liang Jiang
Weibo Kong
Bo Wu
Xiaowei Fu
Yao Xiao
Changlin Zhou
Iranian Polymer Journal, 2016, 25 : 765 - 773

← 1 2 3 4 5 →