Effect of alloy composition on heat resistance and castability of Mg-Al2Ca(Mg) quasi-binary alloys

被引：1

作者：

Kawabata H. ^{[1
]}

Nishino N. ^{[1
]}

Aikawa T. ^{[2
]}

Ohtake K. ^{[3
]}

Genma Y. ^{[3
]}

机构：

[1] Toyota Central R and D Labs. Inc., Nagakute, Nagakute-cho, Aichi-gun, Aichi 480-1192

[2] Aisin Seiki Co., Ltd., Kariya-shi, Aichi

[3] Toyota Motor Corporation, Toyota-shi, Aichi

来源：

Keikinzoku/Journal of Japan Institute of Light Metals | 2010年 / 60卷 / 11期

关键词：

Castability; Diecasting; Heat resistance; Magnesium alloy;

D O I：

10.2464/jilm.60.596

中图分类号：

学科分类号：

摘要：

The effects of the amount of the Al2Ca(Mg) compound on heat resistance and castability of the Mg-Al2Ca(Mg) quasi-binary alloys, the composition ratio of aluminum and calcium of which was 2:1, were investigated. The heat resistance of the Mg-Al2Ca(Mg) quasi-binary alloys was improved by the covering of α-Mg grain boundaries with the Al2Ca(Mg) compound, and more improved by increasing of the amount of the Al2Ca(Mg) compound. The Mg-Al2Ca(Mg) quasi-binary alloys, the compositions of which were close to eutectic one, showed the alloy solidification of the skin-formation type. The duration of the transferred pressure of those molten alloys was long, and the alloys showed the high transfer ability of alloy solidification. It improved the heat resistance and the castability of the Mg-Al2Ca(Mg) quasi-binary alloys for the compositions of aluminum and calcium to be closer to eutectic.

引用

页码：596 / 601

页数：5

共 50 条

[31] Effect of minor elements on the creep resistance of Mg-Zn-Mn-(Ca) alloy
D. M. Kang
J. O. An
J. S. Kwak
International Journal of Automotive Technology, 2010, 11 : 843 - 847
[32] Optimization of heat treatment condition of nonflammable Mg-Al-Ca alloys with high thermal conductivity
Inoue, Shin-ichi
Ishiage, Kakeru
Kawamura, Yoshihito
JOURNAL OF ALLOYS AND COMPOUNDS, 2023, 934
[33] Corrosion Resistance of the Superhydrophobic Mg(OH)2/Mg-Al Layered Double Hydroxide Coatings on Magnesium Alloys
Zhang, Fen
Zhang, Changlei
Zeng, Rongchang
Song, Liang
Guo, Lian
Huang, Xiaowen
METALS, 2016, 6 (04):
[34] Optimization of Mg-Zn-Al-Ca-La alloys for the improvement of casting properties and creep resistance
Anthony, AI
Suzuki, A
Kamado, S
Kojima, Y
MAGNESIUM - SCIENCE, TECHNOLOGY AND APPLICATIONS, 2005, 488-489 : 805 - 809
[35] Effect of treatment time in the Mg(OH)2/Mg-Al LDH composite film formed on Mg alloy AZ31 by steam coating on the corrosion resistance
Kamiyama, Naosumi
Panomsuwan, Gasidit
Yamamoto, Erina
Sudare, Tomohito
Saito, Nagahiro
Ishizaki, Takahiro
SURFACE & COATINGS TECHNOLOGY, 2016, 286 : 172 - 177
[36] Effect of extrusion speed on microstructure and mechanical properties of Mg-Al-Ca-Sn alloy
Zhang, Maochao
Yang, Chao
Li, Zhenshuai
Bao, Shuai
Ye, Peiran
Chen, Yungui
MATERIALS RESEARCH EXPRESS, 2022, 9 (05)
[37] Effect of multiaxial deformation on structure, mechanical properties, and corrosion resistance of a Mg-Ca alloy
Yurchenko, N. Yu
Stepanov, N. D.
Salishchev, G. A.
Serebryany, V. N.
Martynenko, N. S.
Lukyanova, E. A.
Rokhlin, L. L.
Birbilis, N.
Dobatkin, S., V
Estrin, Y. Z.
JOURNAL OF MAGNESIUM AND ALLOYS, 2022, 10 (01) : 266 - 280
[38] Three-Dimensional Morphology of C15-Al2Ca Precipitates in a Mg-Al-Ca Alloy
Kashiwase, Sakiko
Unekawa, Mariko
Hisazawa, Hiromu
Terada, Yoshihiro
MATERIALS TRANSACTIONS, 2019, 60 (09) : 2048 - 2052
[39] Three-Dimensional Morphology of C15-Al2Ca Precipitates in a Mg-Al-Ca Alloy
Kashiwase, Sakiko
Unekawa, Mariko
Hisazawa, Hiromu
Terada, Yoshihiro
JOURNAL OF THE JAPAN INSTITUTE OF METALS AND MATERIALS, 2019, 83 (06) : 193 - 197
[40] Improvement of corrosion resistance and heat dissipation of Mg-6%Al-4%Ca alloy by the addition of Mn, Mm, and the surface treatment
Ito M.
Kondo N.
Kirimoto Y.
Tsukeda T.
Aida T.
Tabata H.
Kurihara H.
Suzuki M.
Keikinzoku/Journal of Japan Institute of Light Metals, 2023, 73 (12): : 646 - 650

← 1 2 3 4 5 →