Effect of dwell time on mid-spatial error in magnetorheological finishing

被引：0

作者：

Jia, Yang ^{[1
]}

Ji, Fang ^{[1
]}

Zhang, Yunfei ^{[1
]}

Huang, Wen ^{[1
]}

机构：

[1] Institute of Mechanical Manufacturing Technology, CAEP, Mianyang

来源：

Qiangjiguang Yu Lizishu/High Power Laser and Particle Beams | 2015年 / 27卷 / 09期

关键词：

Dwell time; Filter; Magnetorheological finishing; Mid-spatial error; Power spectral density;

D O I：

10.11884/HPLPB201527.092007

中图分类号：

学科分类号：

摘要：

For controlling mid-spatial error in the magnetorheological finishing, experiments were carried out to analyze the relationship between the dwell time and mid-spatial error. Based on the matrix method of dwell time algorithm, the fluctuation of the time matrix along the feed direction of polishing reflects the discontinuity of velocity, which will cause the mid-spatial error. This paper advanced to filter the dwell time and smooth the velocity, which can make the velocity of the adjacent points more close, so the polishing wheel only needs a small acceleration and very little time to complete the entire acceleration, so as to reduce the error caused by the fluctuation of speed. Through computer simulation and experiments, it verificated that to give the dwell time a small disturbance, the PSD curve will diverge, and the dwell time filtered will inhabit the mid-spatial error to some extent. ©, 2015, Editorial Office of High Power Laser and Particle Beams. All right reserved.

引用

页数：8

共 7 条

[1] Lawson J.K., Specification of Optical Components Using the Power Spectral Density Function, (1995)
[2] Aikens D.M., Use of power spectral density (PSD) functions in specifying optics for the National Ignition Facility, Proc of SPIE, 2576, pp. 281-290, (1995)
[3] Zhong B., Chen X., Wang J., Et al., Controlling mid-spatial frequency error on 400 mm aperture window, High Power Laser and Particle Beams, 25, 12, pp. 3288-3291, (2013)
[4] Xu X., Yang L., Shi Q., Et al., Effect of magnetorheological finishing on mid-spatial frequency error, High Power Laser and Particle Beams, 24, 7, pp. 1695-1699, (2012)
[5] Cheng X., Zheng W., Jiang X., Et al., Evaluating intermediate frequency error property of wavefront of optical components with PSD collapse, High Power Laser and Particle Beams, 17, 10, pp. 1465-1468, (2005)
[6] Carnal C.L., Egert C.M., Advanced matrix-based algorithm for ion beam milling of optical component, Proc of SPIE, 1752, pp. 542-562, (1992)
[7] Zhang Y., Wang Y., Wang Y., Et al., Dwell time algorithm based on optimization theory for magnetorheological finishing, Journal of Applied Optics, 31, 4, pp. 658-662, (2010)

← 1 →