Uncertainty estimation and performance evaluation of a non-sinusoidal power measurement standard

被引：0

作者：

Yamada, Tatsuji ^{[1
]}

Kon, Saytaro ^{[1
]}

Sakamoto, Norihiko ^{[1
]}

Kato, Hiroaki ^{[2
]}

机构：

[1] National Metrology Institute of Japan (NMIJ), National Institute of Advanced Industrial Science and Technology (AIST), Tsukuba, Ibaraki 305-8563, 1-1-1, Umezono

[2] Japan Electric Meter Inspection Corporation (JEMIC), Minato-ku, Tokyo 108-0023, 4-15-7, Shibaura

来源：

IEEJ Transactions on Fundamentals and Materials | 2012年 / 132卷 / 03期

关键词：

Harmonics; Non-sinusoidal power measurements; Sampling technique; Uncertainty budge; Wideband IVD;

D O I：

10.1541/ieejfms.132.251

中图分类号：

学科分类号：

摘要：

This paper describes the evaluations of the non-sinusoidal power measurement standard, including a wideband inductive voltage divider (IVD), shunt and sampling measurement system which are important components in the standard, at the National Metrology Institute of Japan (NMIJ). The power measurement standard measures harmonic voltages and currents up to 50th harmonic for calibrating power generators. In order to achieve uncertainties of less than 60 ppm and 80 ppm (k=2) for the harmonic voltage and current measurements, the wideband IVD and sampling measurement system in the standard are focused on. Its active power measurement capability has been also evaluated by intercomparison between the Japan Electric Meter Inspection Corporation (JEMIC) and NMIJ. © 2012 The Institute of Electrical Engineers of Japan.

引用

页码：251 / 256

页数：5

共 17 条

[1]

Part 3: Limits - Section 2: Limits for Harmonic Current Emissions (Equipment Input Current ≤ 16A per Phase), (2000)

[2]

Part 3: Limits - Section 3: Limitation of Voltage Fluctuations and Flicker in Low-voltage Supply Systems for Equipment with Rated Current ≤ 16A, (1994)

[3]

Part 4-7: Testing and Measurement Techniques - General Guide on Harmonics and Interharmonics Measurements and Instrumentation, for Power Supply Systems and Equipment Connected Thereto, (2002)

[4]

Svensson S., Power Measurement Techniques for Non-sinusoidal Conditions, (1999)

[5]

Arseneau R., Filipski P., A calibration system for evaluating the performance of harmonic power analyzers, IEEE Trans. Power Delivery, 10, 3, pp. 1172-1182, (1995)

[6]

Arseneau R., John M.S., Zelle J.J., Svensson S., Comparison of nonsinusoidal calibration systems at NRC Canada and SP Sweden, IEEE Trans. Instr. & Meas., 50, 2, pp. 275-277, (2001)

[7]

Yamada T., Kon S., Sakamoto N., Evaluations of a wideband inductive voltage divider and non-sinusoidal power measurement system, Proc. Conf. Dig. CPEM, pp. 239-240, (2010)

[8]

Ramm G., Moser H., Braun A., A new scheme for generating and measuring active reactive and apparent power at power frequencies with uncertainties of 2.5 ppm, IEEE Trans. Instr. & Meas., 48, 2, pp. 422-426, (1999)

[9]

Ihlenfeld W.G.K., Maintenance and Traceability of AC Voltage by Synchronous Digital Synthesis and Sampling, (2001)

[10]

Kibble B.P., Rayner G.H., Coaxial AC Bridges, (1984)

← 1 2 →