共 50 条
- [1] Modeling of ethylene polymerization with difunctional initiators in tubular reactorsJOURNAL OF APPLIED POLYMER SCIENCE, 2008, 109 (06) : 3908 - 3922Khazraei, P. K. F.Dhib, R.
- [2] Principles for selection of initiators for polymerization of ethylene in autoclave reactorsRUSSIAN JOURNAL OF APPLIED CHEMISTRY, 1999, 72 (04) : 711 - 715Ivanchev, SSKondrat'ev, YN
- [3] Modeling and control of tubular solution polymerization reactorsCOMPUTERS & CHEMICAL ENGINEERING, 1997, 21 : S1049 - S1054Vega, MPLima, ELPinto, JC
- [4] Modeling Free Radical Ethylene Polymerization with Multifunctional Comonomers in Tubular Reactors: Influence on Microstructural LDPE PropertiesMACROMOLECULAR SYMPOSIA, 2013, 324 (01) : 67 - 77Kadel, IsabelHerrmann, ThomasBusch, Markus
- [5] TUBULAR POLYMERIZATION REACTORSIZVESTIYA VYSSHIKH UCHEBNYKH ZAVEDENII KHIMIYA I KHIMICHESKAYA TEKHNOLOGIYA, 1987, 30 (03): : 3 - 14MAMINOV, OVNAZMEEV, YG
- [6] Modelling of free radical polymerisation of ethylene using difunctional initiatorsCHEMICAL ENGINEERING SCIENCE, 2002, 57 (14) : 2735 - 2746Dhib, RAl-Nidawy, N
- [7] Possibilities for optimization of technological modes for ethylene polymerization in autoclave and tubular reactorsChemical Engineering Journal, 2005, 107 (1-3): : 221 - 226Kondratiev, Ju.N.Ivanchev, S.S.
- [8] HIGH-PRESSURE TUBULAR REACTORS FOR ETHYLENE POLYMERIZATION OPTIMIZATION ASPECTSPOLYMER ENGINEERING AND SCIENCE, 1991, 31 (05): : 381 - 390BRANDOLIN, AVALLES, EMFARBER, JN
- [9] Possibilities for optimization of technological modes for ethylene polymerization in autoclave and tubular reactorsCHEMICAL ENGINEERING JOURNAL, 2005, 107 (1-3) : 221 - 226Kondratiev, JNIvanchev, SS
- [10] Modeling, Simulation and Optimal Control of Ethylene Polymerization in Non-Isothermal, High-Pressure Tubular ReactorsINTERNATIONAL JOURNAL OF CHEMICAL REACTOR ENGINEERING, 2004, 2Yao, Fred Z.Lohi, AliUpreti, Simant R.Dhib, Ramdhane