Recycling and reusing of nonmetal materials from waste printed circuit boards

被引:0
|
作者
Beijing Key Laboratory for Powder Technology Research and Development, Beijing University of Aeronautics and Astronautics, Beijing 100083, China [1 ]
机构
来源
Huaxue Gongcheng | 2006年 / 10卷 / 59-62期
关键词
D O I
暂无
中图分类号
学科分类号
摘要
A physical method was used in recycling of waste printed circuit boards (PCB). The feasibility of the nonmetal materials to be used in polypropylene (PP) composites as filler was studied and mechanical properties of the composite material were analyzed in the experiment. The result shows that when nonmetal powders reclaimed from waste PCB, finer than 300 meshes, were filled in PP, such mechanical properties of PP composites as the flexural modulus, flexural strength and tensile strength increase by 143%, 69% and 59% respectively. Therefore, filling nonmetal powders reclaimed from waste PCB in PP composites is a feasible way to reuse waste PCB.
引用
收藏
相关论文
共 50 条
  • [31] Exploring the comminution process of waste printed circuit boards in recycling: a review
    Abbadi, Alaa
    Racz, Adam
    Bokanyi, Ljudmilla
    JOURNAL OF MATERIAL CYCLES AND WASTE MANAGEMENT, 2024, 26 (03) : 1326 - 1348
  • [32] Recycling Waste Nonmetallic Printed Circuit Boards for Polyvinyl Chloride Composites
    Moe, Aung Kyaw
    Chungprempree, Jirasuta
    Preechawong, Jitima
    Sapsrithong, Pornsri
    Nithitanakul, Manit
    POLYMERS, 2022, 14 (17)
  • [33] The Status Quo of Mechanical Methods Recycling Waste Printed Circuit Boards
    Yang, Yawei
    Sun, Fuwei
    Tie, Zhanxu
    ELECTRONICS, MECHATRONICS AND AUTOMATION III, 2014, 666 : 383 - +
  • [34] Waste Printed Circuit Boards recycling: an extensive assessment of current status
    Ghosh, B.
    Ghosh, M. K.
    Parhi, P.
    Mukherjee, P. S.
    Mishra, B. K.
    JOURNAL OF CLEANER PRODUCTION, 2015, 94 : 5 - 19
  • [35] Exploring the comminution process of waste printed circuit boards in recycling: a review
    Alaa Abbadi
    Ádám Rácz
    Ljudmilla Bokányi
    Journal of Material Cycles and Waste Management, 2024, 26 : 1326 - 1348
  • [36] On the Investigation of the Thermal Degradation of Waste Printed Circuit Boards for Recycling Applications
    Khalil, Mohamed
    Chaouki, Jamal
    Harvey, Jean-Philippe
    ADVANCED SUSTAINABLE SYSTEMS, 2022, 6 (02):
  • [37] Environment-friendly recycling of resin in waste printed circuit boards
    Wei, Xiao-xuan
    Nie, Chun-chen
    Yu, Yue-xian
    Wang, Jun-xiang
    Lyu, Xian-jun
    Wu, Peng
    Zhu, Xiang-nan
    PROCESS SAFETY AND ENVIRONMENTAL PROTECTION, 2021, 146 : 694 - 701
  • [38] Metals recovery from dust derived from recycling line of waste printed circuit boards
    Wang, Fangfang
    Zhao, Yuemin
    Zhang, Tao
    Zhang, Guangwen
    Yang, Xing
    He, Yaqun
    Wang, Lizhang
    Duan, Chenlong
    JOURNAL OF CLEANER PRODUCTION, 2017, 165 : 452 - 457
  • [39] An Experimental Study on Recycling Waste Printed Circuit Boards with Pyrolysis Technique
    Guo, Xiaojuan
    Zhang, Yufeng
    ITESS: 2008 PROCEEDINGS OF INFORMATION TECHNOLOGY AND ENVIRONMENTAL SYSTEM SCIENCES, PT 1, 2008, : 316 - 321
  • [40] Recycling of organic materials and solder from waste printed circuit boards by vacuum pyrolysis-centrifugation coupling technology
    Zhou, Yihui
    Wu, WenBiao
    Qiu, Keqiang
    WASTE MANAGEMENT, 2011, 31 (12) : 2569 - 2576