Three-dimensional vibration test on handles of hedge-trimmer based on virtual instrument

被引：0
|
作者：
Zhang J. [1 ]
机构：
[1] Agriculture Machinery Testing Appraisal and Extension Station of Beijing
来源：
Nongye Gongcheng Xuebao/Transactions of the Chinese Society of Agricultural Engineering | 2010年 / 26卷 / 04期
关键词：
Instruments; Test; Three-dimensional; Vibrations;
D O I：
10.3969/j.issn.1002-6819.2010.04.020
中图分类号：
学科分类号：
摘要：
In order to find a simple and practical method to test the three-dimensional vibration on the handles of hedge-trimmer, the virtual instrument was used to test the handles on the three-dimensional vibration to explore a new testing model so as to make it possible that 'General Hardware + Software Designing = Multiple Sets of Special Testing Equipments'. The software of virtual instrument was designed to collect, display, and deal with test data timely and accurately, while the choice of testing programme identifies the influence levels caused by various factors, and the selection of general hardware reduced the use of dedicated hardwares. The test results showed that vibration values were related to rotate speed of engine, contact position and contact area. Vibration values of left handle were biggest at the moderate rotate speed, and in the middle of the handle and small contact area. And vibration values of right handle were biggest at the high rotate speed, and in the rear of the handle and moderate contact area. The maximum vibration values were different producing on the left and right handles in frequency domain and in time domain. In order to compare the results, we must test the vibration values in the same condition. The result proves that the virtual instrument is simple and effective when it is used to test the handles on three-dimensional vibration, and it has the value of practical application.
引用
收藏
页码：127 / 133
页数：6
相关论文
共 22 条
  • [1] Ren Q., Liu Q., Virtual instruments, Machinery and Electronics, 4, (2004)
  • [2] (2003)
  • [3] (2005)
  • [4] Cui S., Li J., A vehicle braking performance test system based on virtual instrument, Automobile Science and Technology, 5, pp. 36-37, (2004)
  • [5] Wu Y., Wang X., Zhao Y., Et al., Vehicle ride comfort measurement technique based on virtual instruments, Tractor and Farm Transporter, 33, 4, pp. 23-24, (2006)
  • [6] An J., Mo Q., Wang Z., The application VI's technique to measurement of woodworking machinery, Journal of Beijing Forestry University, 24, 2, pp. 67-69, (2002)
  • [7] Song B., Chen Y., Comparison and choice about virtual instrument's development tools, Foreign Electronic Measurement Technology, 25, 8, pp. 1-3, (2006)
  • [8] An R., Yang K., Electronic and Electro-Optical Systems, 2, pp. 43-45, (2006)
  • [9] Wang D., Wang Y., Chang Z., Design of general virtual instrument drivers based on IVI interface, Foreign Electronic Measurement Technology, 25, 5, pp. 25-29, (2006)
  • [10] Li N., Teng F., System design electro-motor rotational speed control based on LabVIEW, 14, 6, pp. 796-797, (2006)
123