Pseudoreinforcement effect of multiwalled carbon nanotubes in epoxy matrix composites

被引:0
|
作者
Zhuang, G.S. [1 ,2 ]
Sui, G.X. [1 ]
Sun, Z.S. [1 ]
Yang, R. [1 ]
机构
[1] Institute of Metal Research, Chinese Academy of Sciences, Shenyang 110016, China
[2] College of Materials Science and Engineering, Shandong University, Jinan 250061, China
来源
Journal of Applied Polymer Science | 2006年 / 102卷 / 04期
关键词
The carbon nanotube possesses outstanding physical properties. Theoretically; adding carbon nanotubes into a polymer matrix can remarkably improve the mechanical properties of the polymer matrix. In the present work; a series of composites was prepared by incorporating multiwalled carbon nanotubes (MWNTs) into an epoxy resin. The influences of MWNT content and curing temperature on the flexural properties of the epoxy resin were investigated. The results showed that a very low MWNT content should be used to ensure homogeneous dispersion of MWNTs in the epoxy matrix. A higher MWNT content may lead to deteriorated mechanical properties of the composites because of the aggregation of MWNTs. A decline in the flexural properties of the neat epoxy resin with increasing curing temperature was found. However; under the same curing conditions; improvement in flexural properties was observed for the composite with the low MWNT content and a mild curing temperature. The improvement was far beyond the predictions of the traditional short-fiber composite theory. In fact; this improvement should be attributed to the retarding effect of MWNTs on the curing reaction of epoxy matrix. Therefore; the improvement in the flexural properties was only a pseudoreinforcement effect; not a nano-reinforcement effect of the MWNTs on the epoxy resin. Perhaps; it is better for MWNTs to be used as functional fillers; such as electrical or thermal conductive fillers; than as reinforcements. © 2006 Wiley Periodicals; Inc;
D O I
暂无
中图分类号
学科分类号
摘要
Journal article (JA)
引用
收藏
页码:3664 / 3672
相关论文
共 50 条
  • [21] Tribological, Mechanical, and Microstructural of Multiwalled Carbon Nanotubes/Short Carbon Fiber Epoxy Composites
    Gbadeyan, O. J.
    Kanny, Krishnan
    Pandurangan, Mohan Turup
    JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME, 2018, 140 (02):
  • [22] Mechanical and Electrical Properties of Epoxy Composites Modified by Functionalized Multiwalled Carbon Nanotubes
    Smolen, Pawel
    Czujko, Tomasz
    Komorek, Zenon
    Grochala, Dominik
    Rutkowska, Anna
    Osiewicz-Powezka, Malgorzata
    MATERIALS, 2021, 14 (12)
  • [23] Tuning by process of the electrical percolation behavior of multiwalled carbon nanotubes/epoxy composites
    Faiella, G.
    Zarrelli, M.
    Antonucci, V.
    Giordano, M.
    5TH INTERNATIONAL CONFERENCE ON TIMES OF POLYMERS TOP AND COMPOSITES, 2010, 1255 : 411 - 413
  • [24] Multiwalled Carbon Nanotubes: Matrix Nanostructured Composites as Electrode Materials for Supercapacitors
    Zakharov, Yuri
    Simenyuk, Galina
    Kachina, Ekaterina
    Pugachev, Valery
    Dodonov, Vadim
    Yakubik, Denis
    Trosnyanskaya, Tatiana
    Ismagilov, Zinfer
    ENERGY TECHNOLOGY, 2021, 9 (11)
  • [25] Alignment of multiwalled carbon nanotubes in bulk epoxy composites via electric field
    Zhu, Yue-Feng
    Ma, Chen
    Zhang, Wei
    Zhang, Ren-Ping
    Koratkar, Nikhil
    Liang, Ji
    JOURNAL OF APPLIED PHYSICS, 2009, 105 (05)
  • [26] Combined effect of multiwalled carbon nanotubes, graphene nanoplatelets, and aluminum trihydride on the thermal stability of epoxy composites
    Madhu, B. M.
    Rashmi
    Sailaja, R. R. N.
    Rajan, J. Sundara
    POLYMER COMPOSITES, 2022, 43 (03) : 1343 - 1356
  • [27] The effect of carbon nanotubes on epoxy matrix nanocomposites
    Ewelina Ciecierska
    Anna Boczkowska
    Krzysztof Jan Kurzydlowski
    Iosif Daniel Rosca
    Suong Van Hoa
    Journal of Thermal Analysis and Calorimetry, 2013, 111 : 1019 - 1024
  • [28] The effect of carbon nanotubes on epoxy matrix nanocomposites
    Ciecierska, Ewelina
    Boczkowska, Anna
    Kurzydlowski, Krzysztof Jan
    Rosca, Iosif Daniel
    Van Hoa, Suong
    JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY, 2013, 111 (02) : 1019 - 1024
  • [29] A Homogeneous Dispersion of Multiwalled Carbon Nanotubes and the Copper Powders Mixture in the Epoxy Matrix - An Analysis through Mechanical Properties of Composites
    Aslam, Muhammad
    Jo, Minkyung
    Bae, Donghyun
    POLYMER-PLASTICS TECHNOLOGY AND ENGINEERING, 2009, 48 (05) : 496 - 502
  • [30] Multiwalled carbon nanotubes/polystyrene composites
    Bolbukh, Y.U.M.
    Gun'ko, G.S.
    Prikhod'ko, G.P.
    Tertykh, V.A.
    Journal of Nanostructured Polymers and Nanocomposites, 2009, 5 (01): : 14 - 22