Thermal performance of a two-phase closed thermosyphon for waste heat recovery system

被引:21
|
作者
Kannan M. [1 ]
Natarajan E. [2 ]
机构
[1] Department of Mechanical Engineering, Adhiparasakthi Engineering College, Melmaruvathur, Tamilnadu
[2] Institute for Energy Studies, Department of Mechanical Engineering, Anna University Chennai, Chenna-600 025, Tamilnadu
关键词
Filling ratio; Heat transfer characteristics; Heat transport capability; Thermal performance; Thermosyphon; Waste heat recovery;
D O I
10.3923/jas.2010.413.418
中图分类号
学科分类号
摘要
Performance study of a two phase closed thermosyphon was experimentally investigated. The experiments were carried out for different filling ratios of 30 to 90% with input heat transfer rates of 0 to 1000 W and for various working fluids such as distilled water, ethanol, methanol and acetone. Investigations were focused to find the influence of the filling ratio, maximum heat transport capability for various working fluids in a vertical two phase closed thermosyphon. The maximum heat transport capability was found to be high for water compared to other fluids such as ethanol, methanol and acetone, at the operating temperatures higher than 40°C. © 2010 Asian Network for Scientific Information.
引用
收藏
页码:413 / 418
页数:5
相关论文
共 50 条
  • [41] A case study on internal flow patterns of the two-phase closed thermosyphon (TPCT)
    Sichamnan, S.
    Chompookham, T.
    Parametthanuwat, T.
    CASE STUDIES IN THERMAL ENGINEERING, 2020, 18 (18)
  • [42] Waste heat recovery by means of Organic Rankine Cycle (ORC) system coupled with two-phase closed thermosyphons
    Lê V.L.
    Declaye S.
    Dumas X.
    Ferrand L.
    Lemort V.
    Lê, Van Long (vanlong.le@ulg.ac.be), 1600, International Journal of Thermodynamics (20): : 81 - 89
  • [43] Evaluation of internal structure modifications effect of two-phase closed thermosyphon on performance: An experimental study
    Ozbas, Engin
    Selimli, Selcuk
    Ozkaymak, Mehmet
    Frej, Alsediq S. S.
    SOLAR ENERGY, 2021, 224 (224) : 1326 - 1332
  • [44] Performance optimization of a two-phase closed thermosyphon through CFD numerical simulations
    Fertahi, Saif Ed-Din
    Bouhal, T.
    Agrouaz, Y.
    Kousksou, T.
    El Rhafiki, T.
    Zeraouli, Y.
    APPLIED THERMAL ENGINEERING, 2018, 128 : 551 - 563
  • [45] Numerical Investigation of the Two-Phase Closed Thermosyphon Operating with Non-Uniform Heat Flux Profiles
    Wang, Zhao
    Turan, Ali
    Craft, Timothy
    ENERGIES, 2023, 16 (13)
  • [46] Heat transfer characteristics of an external-fin-assisted two-phase closed thermosyphon: An experimental study
    Alizadeh, Milad
    Ganji, Davood Domiri
    HEAT TRANSFER, 2020, 49 (08) : 4304 - 4320
  • [47] An experimental investigation on thermal efficiency of two-phase closed thermosyphon (TPCT) filled with CuO/water nanofluid
    Kaya, Metin
    ENGINEERING SCIENCE AND TECHNOLOGY-AN INTERNATIONAL JOURNAL-JESTECH, 2020, 23 (04): : 812 - 820
  • [48] Effect of Internal Helical Microfin on Condensation Performance of Two-Phase Closed Thermosyphon
    Wang, Xinyu
    Xin, Gongming
    Tian, Fuzhong
    Cheng, Lin
    ELECTRICAL POWER & ENERGY SYSTEMS, PTS 1 AND 2, 2012, 516-517 : 9 - 14
  • [49] Two-phase closed thermosyphon vapor-chamber system for electronic cooling
    Tsai, Te-En
    Wu, Hsin-Hsuan
    Chang, Chih-Chung
    Chen, Sih-Li
    INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER, 2010, 37 (05) : 484 - 489
  • [50] Utilization of Fly Ash Nanofluids in Two-phase Closed Thermosyphon for Enhancing Heat Transfer
    Sozen, A.
    Menlik, T.
    Guru, M.
    Irmak, A. F.
    Kilic, F.
    Aktas, M.
    EXPERIMENTAL HEAT TRANSFER, 2016, 29 (03) : 337 - 354