Thermal performance of a two-phase closed thermosyphon for waste heat recovery system

被引：21
|
作者：
Kannan M. [1 ]
Natarajan E. [2 ]
机构：
[1] Department of Mechanical Engineering, Adhiparasakthi Engineering College, Melmaruvathur, Tamilnadu
[2] Institute for Energy Studies, Department of Mechanical Engineering, Anna University Chennai, Chenna-600 025, Tamilnadu
来源：
Journal of Applied Sciences | 2010年 / 10卷 / 05期
关键词：
Filling ratio; Heat transfer characteristics; Heat transport capability; Thermal performance; Thermosyphon; Waste heat recovery;
D O I：
10.3923/jas.2010.413.418
中图分类号：
学科分类号：
摘要：
Performance study of a two phase closed thermosyphon was experimentally investigated. The experiments were carried out for different filling ratios of 30 to 90% with input heat transfer rates of 0 to 1000 W and for various working fluids such as distilled water, ethanol, methanol and acetone. Investigations were focused to find the influence of the filling ratio, maximum heat transport capability for various working fluids in a vertical two phase closed thermosyphon. The maximum heat transport capability was found to be high for water compared to other fluids such as ethanol, methanol and acetone, at the operating temperatures higher than 40°C. © 2010 Asian Network for Scientific Information.
引用
收藏
页码：413 / 418
页数：5
相关论文
共 50 条
  • [21] Heat transfer performance of two-phase closed thermosyphon with oxidized CNT/water nanofluids
    Heris, Saeed Zeinali
    Fallahi, Marjan
    Shanbedi, Mehdi
    Amiri, Ahmad
    HEAT AND MASS TRANSFER, 2016, 52 (01) : 85 - 93
  • [22] Numerical investigations on the thermal performance of two-phase closed thermosyphon with extended condenser surface
    Liu, Zhao
    Zhao, Jin
    Wang, Chao
    Qin, Yangjun
    Wang, Yanbiao
    Liu, Chang
    HEAT AND MASS TRANSFER, 2023, 59 (03) : 377 - 392
  • [23] Heat transfer performance of two-phase closed thermosyphon with oxidized CNT/water nanofluids
    Saeed Zeinali Heris
    Marjan Fallahi
    Mehdi Shanbedi
    Ahmad Amiri
    Heat and Mass Transfer, 2016, 52 : 85 - 93
  • [24] A comparative investigation on the effect of different nanofluids on the thermal performance of two-phase closed thermosyphon
    Xu, Qian
    Liu, Lin
    Feng, Junxiao
    Qiao, Lihong
    Yu, Chuqiao
    Shi, Wenjun
    Ding, Chong
    Zang, Yong
    Chang, Chun
    Xiong, Yaxuan
    Ding, Yulong
    INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2020, 149
  • [25] The rectangular two-phase closed thermosyphon: A case study of two-phase internal flow patterns behaviour for heat performance
    Chompookham, Teerapat
    Sichamnan, Surachet
    Bhuwakietkumjohn, Nipon
    Parametthanuwat, Thanya
    ARCHIVES OF THERMODYNAMICS, 2020, 41 (03) : 223 - 254
  • [26] Effects of hydrophobic and superhydrophobic coatings of a condenser on the thermal performance of a two-phase closed thermosyphon
    Kim, Yeonghwan
    Kim, Jin Sub
    Shin, Dong Hwan
    Seo, Jin Hyeuk
    You, Seung M.
    Lee, Jungho
    INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2019, 144
  • [27] Numerical investigations on the thermal performance of two-phase closed thermosyphon with extended condenser surface
    Zhao Liu
    Jin Zhao
    Chao Wang
    Yangjun Qin
    Yanbiao Wang
    Chang Liu
    Heat and Mass Transfer, 2023, 59 : 377 - 392
  • [28] Performance enhancement of a two-phase closed thermosyphon with a vortex generator
    Tarokh, Ali
    Bliss, Connor
    Hemmati, Arman
    APPLIED THERMAL ENGINEERING, 2021, 182
  • [29] Experimental and computational investigation of thermal performance and fluid flow in two-phase closed thermosyphon
    Cho, Sehyeon
    Kong, Daeyoung
    Geum, Gyohoon
    Kang, Sukkyung
    Seo, Jin Hyeuk
    Kim, Jun Soo
    Lee, Seong Hyuk
    Lee, Jungho
    Lee, Hyoungsoon
    APPLIED THERMAL ENGINEERING, 2023, 235
  • [30] Thermal performance of rotating two-phase thermosyphon disc
    Chang, S. W.
    Lin, C. Y.
    INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2013, 62 : 40 - 54
12345