Thermal performance of a two-phase closed thermosyphon for waste heat recovery system

被引：21
|
作者：
Kannan M. [1 ]
Natarajan E. [2 ]
机构：
[1] Department of Mechanical Engineering, Adhiparasakthi Engineering College, Melmaruvathur, Tamilnadu
[2] Institute for Energy Studies, Department of Mechanical Engineering, Anna University Chennai, Chenna-600 025, Tamilnadu
来源：
Journal of Applied Sciences | 2010年 / 10卷 / 05期
关键词：
Filling ratio; Heat transfer characteristics; Heat transport capability; Thermal performance; Thermosyphon; Waste heat recovery;
D O I：
10.3923/jas.2010.413.418
中图分类号：
学科分类号：
摘要：
Performance study of a two phase closed thermosyphon was experimentally investigated. The experiments were carried out for different filling ratios of 30 to 90% with input heat transfer rates of 0 to 1000 W and for various working fluids such as distilled water, ethanol, methanol and acetone. Investigations were focused to find the influence of the filling ratio, maximum heat transport capability for various working fluids in a vertical two phase closed thermosyphon. The maximum heat transport capability was found to be high for water compared to other fluids such as ethanol, methanol and acetone, at the operating temperatures higher than 40°C. © 2010 Asian Network for Scientific Information.
引用
收藏
页码：413 / 418
页数：5
相关论文
共 50 条
  • [1] Experimental investigation of the thermal performance of a two-phase closed thermosyphon at different operating conditions
    Gedik, Engin
    ENERGY AND BUILDINGS, 2016, 127 : 1096 - 1107
  • [2] Thermal performance enhancement in two-phase closed thermosyphon with sandblasted evaporator surface
    Kang, Sukkyung
    Lee, Seokjin
    Lee, Jungho
    INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER, 2024, 159
  • [3] DESIGN AND EXPERIMENTAL ANALYSIS OF HEAT TRANSFER PERFORMANCE OF A TWO-PHASE CLOSED THERMOSYPHON SYSTEM
    Elmosbahi, M. S.
    Hamdi, M.
    Hazami, M.
    JOURNAL OF APPLIED MECHANICS AND TECHNICAL PHYSICS, 2023, 64 (05) : 858 - 870
  • [4] Modelling of heat and mass transfer in a two-phase closed thermosyphon
    Lataoui, Zied
    Benselama, Adel M.
    ENERGY, 2024, 313
  • [5] Numerical Study on the Transient Thermal Performance of a Two-Phase Closed Thermosyphon
    Zhao, Zhongchao
    Zhang, Yong
    Zhang, Yanrui
    Zhou, Yimeng
    Hu, Hao
    ENERGIES, 2018, 11 (06):
  • [6] Heat transfer performance of an anodized two-phase closed thermosyphon with refrigerant as working fluid
    Solomon, A. Brusly
    Roshan, R.
    Vincent, Walter
    Karthikeyan, V. K.
    Asirvatharn, L. Godson
    INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2015, 82 : 521 - 529
  • [7] Effects and limitations of superhydrophobic surfaces on the heat transfer performance of a two-phase closed thermosyphon
    Seo, Donghyun
    Park, Jinsoo
    Shim, Jaehwan
    Nam, Jeonghyeon
    Shin, Dong Hwan
    Nam, Youngsuk
    Lee, Jungho
    INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2021, 176
  • [8] Heat transfer characteristics of a two-phase closed thermosyphon
    Noie, SH
    APPLIED THERMAL ENGINEERING, 2005, 25 (04) : 495 - 506
  • [9] Characterization and performance of a 3D-printed two-phase closed thermosyphon
    Mohseni-Gharyehsafa, Behnam
    Lyulin, Yuriy V. A.
    Evlashin, Stanislav A.
    Kabov, Oleg
    Ouerdane, Henni
    THERMAL SCIENCE AND ENGINEERING PROGRESS, 2022, 28
  • [10] Heat transfer in a two-phase closed thermosyphon working in Polar Regions
    Kuznetsov, G., V
    Ponomarev, K. O.
    Feoktistov, D., V
    Orlova, E. G.
    Lyulin, Yu, V
    Ouerdane, H.
    THERMAL SCIENCE AND ENGINEERING PROGRESS, 2021, 22
12345