Residual ultimate strength of ship plates under cyclic in-plane compressive loading

被引：0
|
作者：
Cui, Huwei [1 ]
Yang, Ping [1 ]
机构：
[1] School of Transportation, Wuhan University of Technology, Wuhan
来源：
Huazhong Keji Daxue Xuebao (Ziran Kexue Ban)/Journal of Huazhong University of Science and Technology (Natural Science Edition) | 2015年 / 43卷 / 04期
关键词：
Cyclic compressive load; Nonlinear finite element; Plastic deformation accumulation; Residual load bearing capacity; Ship plate; Ultimate strength;
D O I：
10.13245/j.hust.150422
中图分类号：
学科分类号：
摘要：
A simplified method was provided for analyzing the residual ultimate strength of ship plates under in-plane cyclic compressive load based on the plastic deformation accumulation, by using compressive thin-plate elastic large deflection theory and rigid-plastic analysis. Three typical steps including loading, plastic flow and unloading step were distinguished in the cyclic compressive loading process. The results based on the simplified method can meet with the existing experiment phenomenon much better. The last, a real ship plate was used to discuss whose residual ultimate strength behavior under in-plane cyclic compressive loading by the simplified method and nonlinear finite element method (FEM), and the both results can match each other well. ©, 2015, Huazhong University of Science and Technology. All right reserved.
引用
收藏
页码：108 / 112
页数：4
相关论文
共 7 条
  • [1] Paik J.K., Kim B.J., Seo J.K., Methods for ultimation limit state assessment of ships and ship-shaped offshore structures: Past III hull girders, Ocean Engineering, 35, pp. 281-286, (2008)
  • [2] Paik J.K., Pedersen P.T., A simplified method for predicting ultimate compressive strength of ship panels, Int Shipbuild Progr, 43, 434, pp. 139-157, (1998)
  • [3] Pei Z., Kazuhiro L., Masahiko F., Et al., Simulation on progressive collapse behaviour of whole ship model under extreme waves using idealized structural unit method, Marine Structures, 40, pp. 104-133, (2015)
  • [4] Ayhan B., Jehel P., Brancherie D., Et al., Coupled damage-plasticity model for cyclic loading: theoretical formulation and numerical implementation, Engineering Structures, 50, pp. 30-42, (2013)
  • [5] Fukumoto Y., Kusama H., Local instability tests of plate elements under cyclic uniaxial loading, Journal of Structural Engineering, 111, 5, pp. 1051-1067, (1985)
  • [6] Yao T., Nikolov P.I., Progressive collapse analysis of a ship's Hull under longitudinal bending, Journal of the Society of Naval Architects of Japan, 170, pp. 449-461, (1991)
  • [7] Yao T., Nikolov P.I., Buckling/plastic collapse of plates under cyclic loading, Soc Naval Arch Japan, 168, pp. 449-462, (1990)
1