Polypropylene + polystyrene blends with a compatibilizer. Part I. Morphology and thermophysical properties

被引：0
|
作者：
Brostow, Witold [1 ]
Grguric, Tamara Holjevac [1 ,2 ]
Olea-Mejia, Oscar [1 ,3 ]
Rek, Vesna [2 ]
Unni, Jaykumar [1 ]
机构：
[1] Laboratory of Advanced Polymers and Optimized Materials (LAPOM), Department of Materials Science and Engineering, University of North Texas, PO Box 305310, Denton, TX 76203-5310, United States
[2] Department of Polymer Engineering and Organic Chemical Technology, Faculty of Chemical Engineering and Technology, University of Zagreb, Marulićev trg 19, 10000 Zagreb, Croatia
[3] Laboratorio de Investigación y Desarrollo de Materiales Avanzados (LIDMA), Facultad de Química, Universidad Autónoma del Estado de México, Km. 12 de la carretera Toluca-Atlacomulco, San Cayetano 50200, Mexico
来源：
E-Polymers | 2008年
关键词：
Polymer blends;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
引用
收藏
相关论文
共 50 条
  • [31] Mechanical and morphological properties of maleated polypropylene maleated rubber compatibilizer blends
    Phan, TTM
    DeNicola, AJ
    Schadler, LS
    CONFERENCE PROCEEDINGS AT ANTEC '98: PLASTICS ON MY MIND, VOLS I-3: VOL I; PROCESSING, VOL II; SPECIAL AREAS, VOL III; MATERIALS, 1998, 44 : 2443 - 2447
  • [32] Effect of a Compatibilizer on the Morphology and Properties of Polypropylene/Polyethylentherephthalate Spun Fibers
    La Mantia, Francesco Paolo
    Ceraulo, Manuela
    Giacchi, Gaia
    Mistretta, Maria Chiara
    Botta, Luigi
    POLYMERS, 2017, 9 (02)
  • [33] Effect of compatibilizer on morphology and properties of HDPE/Nylon 6 blends
    Feng, Jingxing
    Zhang, Guojun
    MacInnis, Kari
    Li, Zhenpeng
    Olah, Andrew
    Baer, Eric
    JOURNAL OF POLYMER SCIENCE PART B-POLYMER PHYSICS, 2019, 57 (05) : 281 - 290
  • [34] Toward Mechanical Recycling of Polystyrene/Polypropylene Blends with Bottlebrush-Modified Graphene Oxide as a Compatibilizer
    Seyedi, Mastooreh
    Savchak, Mykhailo
    Tiiara, Andrii
    Luzinov, Igor
    ACS APPLIED MATERIALS & INTERFACES, 2022, 14 (30) : 35074 - 35086
  • [35] Effect of compatibilizer admixture, mixing conditions, and temperature on the development of the phase structure in polypropylene/polystyrene blends
    Fortelny, I
    Michalkova, D
    POLYMER NETWORKS & BLENDS, 1997, 7 (03): : 125 - 131
  • [36] Effect of compatibilizer on morphology and mechanical properties of SAN/EPDM blends
    Pticek, A.
    Hrnjak-Murgic, Z.
    Jelencic, J.
    INTERNATIONAL POLYMER PROCESSING, 2008, 23 (04) : 356 - 362
  • [37] Morphology development during isothermal crystallization. I. Isotactic and atactic polypropylene blends
    Wang, Zhi-Gang
    Phillips, Roger A.
    Hsiao, Benjamin S.
    2000, John Wiley and Sons Inc. (38)
  • [38] Morphology development during isothermal crystallization. I. Isotactic and atactic polypropylene blends
    Wang, ZG
    Phillips, RA
    Hsiao, BS
    JOURNAL OF POLYMER SCIENCE PART B-POLYMER PHYSICS, 2000, 38 (19) : 2580 - 2590
  • [39] Optimizing the morphology, mechanical and crystal properties of in-situ polypropylene/polystyrene blends by reactive extrusion
    Ruiqi Chen
    Xueliang Jiang
    Feng You
    Chu Yao
    Fibers and Polymers, 2016, 17 : 1550 - 1557
  • [40] Morphology, structure and properties of nonwoven materials obtained by melt electrospinning of polypropylene-polystyrene blends
    Malakhov, Sergey N.
    Chvalun, Sergei N.
    POLYMER ENGINEERING AND SCIENCE, 2022, 62 (11): : 3503 - 3510
12345