Research on the effect of friction power loss of internal combustion engines' main bearings

被引：0
作者：
Shao, Kang [1 ]
Liu, Changwen [1 ]
Bi, Fengrong [1 ]
Lu, Di [1 ]
Zhang, Jian [1 ]
机构：
[1] State Key Laboratory of Engines, Tianjin University, Tianjin
来源：
Zhendong Ceshi Yu Zhenduan/Journal of Vibration, Measurement and Diagnosis | 2015年 / 35卷 / 06期
关键词：
Friction power loss; Internal combustion engine; Main bearing; Reynolds equation;
D O I：
10.16450/j.cnki.issn.1004-6801.2015.06.003
中图分类号：
学科分类号：
摘要：
This paper investigates the influence of friction power loss on the main bearings of an internal combustion engine crankshaft that accounts for the major tribological operating factors: main journal surface roughness, lubrication oil temperature, engine crankshaft speed, journal bearing clearance, and fuel supply advance angle. All these factors have been analyzed in detail for an in-line six-cylinder internal combustion engine. The mathematical model is mainly based on the Reynolds equation, which can be solved using the finite-difference method and the Euler method. The lubrication film contact is calculated based on the Reynolds differential equation via the pressure balance calculated iteratively in the time domain. The results show that friction power loss factors such as main bearing clearance and surface roughness should be considered engineering factors in the engine and component design process. © 2015, Nanjing University of Aeronautics an Astronautics. All right reserved.
引用
收藏
页码：1019 / 1024
页数：5
相关论文
共 15 条
  • [1] Wu Z., Yuan H., Dyanmic reliability analysis of engine shafting under random loads, Journal of Vibration, Measurement & Diagnosis, 30, 5, pp. 534-538, (2010)
  • [2] He Z., Gan H., Han H., Coupling analysis on dynamics and tribology of a cracked crankshaft-bearing System, Transactions of Csice, 1, pp. 90-95, (2013)
  • [3] Wang X., Wen S., Gui C., Lubricating analysis for dynamic load journal bearing considering surface roughness effects, Chinese Journal of Mechanical Engineering, 1, pp. 27-31, (2000)
  • [4] Wang G., Hao Y., Ma W., Et al., Thermo-elastohydrodynamic lubrication research of main bearings in IC engines, Chinese Internal Combustion Engine Engineering, 5, pp. 63-68, (2010)
  • [5] Priestner C., Allmaier H., Priebsch H.H., Et al., Refined Simulation of friction power loss in crank shaft slider bearings considering wear in the mixed lubrication regime, Tribology International, 46, 1, pp. 200-207, (2012)
  • [6] Offner G., Friction power loss simulation of internal combustion engines considering mixed lubricated radial slider, Axial slider and piston to liner contacts, Tribology Transactions, 56, 3, pp. 503-515, (2013)
  • [7] Coy R.C., Practical application of lubrication models in engines, Tribology International, 31, 10, pp. 563-571, (1998)
  • [8] Taylor R.I., Coy R.C., Improved fuel efficiency by lubricant design: A review, Proceedings of the Institution of Mechanical Engineers - Part J: Journal of Engineering Tribology, 214, pp. 1-15, (2000)
  • [9] Thomsen K., Klit P., A study on compliant layers and its influence on dynamic response of a hydrodynamic journal bearing, Tribology International, 44, pp. 1872-1877, (2011)
  • [10] Wang P., Keith J.T.G., Vaidyanathan K., Combined surface roughness pattern and non-Newtonian effects on the performance of dynamically loaded journal bearings, Tribology Transactions, 45, pp. 1-10, (2002)
12