Assessment of the Functional Properties of the Surfaces of Ductile Cast Iron Parts

被引:1
作者
Grochala, Daniel [1 ]
Jasiewicz, Marcin [1 ]
Filipowicz, Krzysztof [2 ]
Parus, Arkadiusz [1 ]
Powalka, Bartosz [1 ]
Grzejda, Rafal [1 ]
Zmarzly, Pawel [3 ]
机构
[1] West Pomeranian Univ Technol Szczecin, Fac Mech Engn & Mechatron, PL-70310 Szczecin, Poland
[2] Dynpap Sp zoo, PL-71642 Szczecin, Poland
[3] Kielce Univ Technol, Fac Mechatron & Mech Engn, PL-25314 Kielce, Poland
来源
APPLIED SCIENCES-BASEL | 2024年 / 14卷 / 19期
关键词
machining; surface geometric texture; ductile cast iron; CNC machine tools; ROUGHNESS; MACHINABILITY; OPTIMIZATION; SIMULATION; FORCES; LIFE;
D O I
10.3390/app14199129
中图分类号
O6 [化学];
学科分类号
0703 ;
摘要
Modern technology allows ductile cast iron parts to be efficiently machined while ensuring a relatively long tool life. One of the basic indices describing the susceptibility of ductile cast irons to change in volume, shape, and dimensions under machining conditions is their machinability. Machinability can be expressed directly in terms of the values of basic quantities such as periodic cutting speed and roughness. At the same time, machinability is a relative quantity evaluated alternatively. This means that the machinability of ductile cast iron can be good, allowing high cutting speeds to be achieved, but it can also be poor, expressed in terms of poor surface quality. In the experimental research carried out, an attempt was made to determine the limit values of the cutting speed, beyond which one should not exceed, in order to increase the efficiency of the machining process. The surface roughness, unlike the periodic cutting speed, is a quantity defined in the product design documentation, so its limits must be observed. In addition to the usual indices of surface geometric texture, the research analysed alternative indices for determining the condition of surface geometric texture and the influence of periodic cutting speed on their values. In the conclusions, valuable recommendations are given for designers and technologists on the purpose and functionality of product surfaces and how to define them. Methods of specifying tribological characteristics, hydrophobic or hydrophilic properties, as well as the ability to retain fluids and maintain protective coatings of ductile cast iron parts after machining are described, for which relative values, depending on the machining parameters used, can vary from about 10 to even 30%.
引用
收藏
页数:14
相关论文
共 53 条
  • [1] Akun Y., 2003, Pamukkale Univ. J. Eng. Sci, V9, P191
  • [2] [Anonymous], 2024, PN-EN 1561
  • [3] [Anonymous], 2012, PN-EN ISO 25178-3
  • [4] [Anonymous], 2022, PN-EN ISO 25178-2
  • [5] [Anonymous], 2016, PN-EN ISO 25178-1
  • [6] [Anonymous], 2018, PN-EN 1563
  • [7] Optimization of feedrate in a face milling operation using a surface roughness model
    Baek, DK
    Ko, TJ
    Kim, HS
    [J]. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 2001, 41 (03) : 451 - 462
  • [8] Yield and fracture loci for a ductile cast iron EN-GJS']JS-600-3 under biaxial stresses
    Benedetti, M.
    Curtolo, Tommaso
    Dallago, Michele
    Fontanari, Vigilio
    Lusuardi, Danilo
    [J]. FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, 2022, 45 (03) : 783 - 800
  • [9] Plain and notch fatigue strength of thick-walled ductile cast iron EN-GJS']JS-600-3: A double-notch critical distance approach to defect sensitivity
    Benedetti, Matteo
    Santus, Ciro
    Fontanari, Vigilio
    Lusuardi, Danilo
    Zanini, Filippo
    Carmignato, Simone
    [J]. INTERNATIONAL JOURNAL OF FATIGUE, 2021, 152
  • [10] Binali R., 2022, J. Sci. East, V5, P41, DOI [10.57244/dfbd.1200347, DOI 10.57244/DFBD.1200347]