Microstructure and mechanical properties of C-Si-Mn TRIP steel prepared by hot rolling

被引：0
|
作者：
Faculty of Material and Chemical Engineering, Jiangxi University of Science and Technology, Ganzhou 341000, China [1 ]
不详 [2 ]
机构：
来源：
Cailiao Kexue yu Gongyi | 2008年 / 3卷 / 319-321期
关键词：
Austenite - Tensile strength - Tensile testing - Hot rolling - Yield stress - High strength steel - Plasticity - Manganese alloys - Silicon alloys;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
To reveal the relationship between the microstructure, mechanics properties and the process, a TRIP steel was prepared by hot rolling and controlling cooling in laboratory. The microstructure of the steel was studied by OP, SEM and TEM. The results of tensile tests indicated that the mechanics properties of experimental TRIP steels were tensile strength of 605 MPa, yield strength of 440 MPa, high elongation of 28.4% and ratio of yield strength to tensile strength of 0.73. The results indicated that the microstructure was composed of ferrite, bainite and retained austenite. The results of quantitative colour metallography showed that retained austenite fraction was around 5.6%.
引用
收藏
相关论文
共 50 条
  • [21] Microstructure and mechanical properties of a Mn-Si-Mo TRIP steel during rod rolling simulation using torsion testing
    Liu, XD
    Es-Sadiqi, E
    Yue, S
    40TH MECHANICAL WORKING AND STEEL PROCESSING CONFERENCE PROCEEDINGS, VOL XXXVI, 1998, 36 : 741 - 747
  • [22] Influence of intercritical annealing temperature on microstructure and mechanical properties in 0.11C-0.6Si-1.5Mn cold rolling TRIP steel sheets
    Shi, Wen
    Li, Lin
    Fu, Renyu
    Gao, Beibei
    Kang T'ieh/Iron and Steel (Peking), 2004, 39 (08):
  • [23] Effect of hot rolling conditions on the microstructure and mechanical properties of Fe-C-Mn-Si multiphase steels
    Koh, HJ
    Lee, SK
    Park, SH
    Choi, SJ
    Kwon, SJ
    Kim, NJ
    SCRIPTA MATERIALIA, 1998, 38 (05) : 763 - 768
  • [24] Microstructure and Mechanical Properties of Hot-Rolled Fe-Mn-C-Si TWIP Steel
    Li Zhang
    Xiang-hai Liu
    Kang-ying Shu
    Journal of Iron and Steel Research International, 2011, 18 : 45 - 48
  • [25] Microstructure and Mechanical Properties of Hot-Rolled Fe-Mn-C-Si TWIP Steel
    Zhang Li
    Liu Xiang-hai
    Shu Kang-ying
    JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL, 2011, 18 (12) : 45 - +
  • [26] Microstructure and Mechanical Properties of Hot-Rolled Fe-Mn-C-Si TWIP Steel
    ZHANG Li~1
    2.Department of Materials Science and Engineering
    JournalofIronandSteelResearch(International), 2011, 18 (12) : 45 - 48
  • [27] Influence of Hot Rolling Conditions on the Mechanical Properties of Hot Rolled TRIP Steel
    李壮
    Journal of Wuhan University of Technology(Materials Science Edition), 2008, (01) : 74 - 79
  • [28] Influence of hot rolling conditions on the mechanical properties of hot rolled TRIP steel
    Li Zhuang
    Wu Di
    JOURNAL OF WUHAN UNIVERSITY OF TECHNOLOGY-MATERIALS SCIENCE EDITION, 2008, 23 (01): : 74 - 79
  • [29] Influence of hot rolling conditions on the mechanical properties of hot rolled TRIP steel
    Zhuang Li
    Di Wu
    Journal of Wuhan University of Technology-Mater. Sci. Ed., 2008, 23 : 74 - 79
  • [30] Forming response of retained austenite in a C-Si-Mn high strength TRIP sheet steel
    Streicher, AM
    Speer, JG
    Matlock, DK
    STEEL RESEARCH, 2002, 73 (6-7): : 287 - 293
12345