Analysis of the replication properties of lightguiding plate for micro injection compression molding

被引：0
|
作者：
Shen, Y.K. [1 ]
Chang, H.J. [1 ]
Hung, L.H. [1 ]
机构：
[1] Department of Mechanical Engineering, LungHwa University of Science and Technology, Kueishan, Taoyuan County, 333, 300 Wanshou RD.
来源：
Key Engineering Materials | 2007年 / 329卷
关键词：
Lightguiding plate; Micro injection compression molding; Microstructure; Replication;
D O I：
10.4028/0-87849-416-2.643
中图分类号：
学科分类号：
摘要：
This paper presents the application of microstructure replication of lightguiding plate for micro injection compression molding (MICM). The lightguiding plate is applied on LCD of two inch of digital camera. Its radius of micro-structure is from 100μm to 300μm by linearity expansion. The material of lightguiding plate is PMMA. This paper discusses the replication properties for different process parameters by single-parameter method for micro injection compression molding. The important process parameters of replication properties are the mold temperature, compression distance and melt temperature in micro injection compression molding. The mold temperature is the most significant factor of replication properties of microstructure of lightguiding plate for micro injection compression molding.
引用
收藏
页码：643 / 648
页数：5
相关论文
共 50 条
  • [31] Preparation and characterization of micro components fabricated by micro powder injection molding
    Liu, L.
    Loh, N. H.
    Tay, B. Y.
    Tor, S. B.
    Yin, H. Q.
    Qu, X. H.
    MATERIALS CHARACTERIZATION, 2011, 62 (06) : 615 - 620
  • [32] The Influence of Injection Molding and Injection Compression Molding on Ultra-high Molecular Weight Polyethylene Polymer Microfabrication
    Kuo, H. -C.
    Jeng, M. -C.
    INTERNATIONAL POLYMER PROCESSING, 2011, 26 (05) : 508 - 516
  • [33] Micro-Injection Molding of Diffractive Structured Surfaces
    Boinski, Ann-Katrin
    Adam, Barnabas
    Vogelsang, Arne
    Schoenemann, Lars
    Riemer, Oltmann
    Karpuschewski, Bernhard
    JOURNAL OF MANUFACTURING AND MATERIALS PROCESSING, 2021, 5 (01):
  • [34] Fabrication of Micro-Structured Polymer by Micro Injection Molding Based on Precise Micro-Ground Mold Core
    Lu, Yanjun
    Chen, Fumin
    Wu, Xiaoyu
    Zhou, Chaolan
    Lou, Yan
    Li, Liejun
    MICROMACHINES, 2019, 10 (04)
  • [35] Fabrication and evaluation of micro parts by metal injection molding
    Osada, Toshiko
    Nishiyabu, Kazuaki
    Matsuzaki, Satoru
    Tanaka, Shigeo
    Miura, Hideshi
    Nihon Kikai Gakkai Ronbunshu, A Hen/Transactions of the Japan Society of Mechanical Engineers, Part A, 2004, 70 (10): : 1522 - 1528
  • [36] Evaluation of Vacuum Venting for Micro-injection Molding
    Yoon, S. -H.
    Padmanabha, P.
    Cha, N. -G.
    Mead, J. L.
    Barry, C. M. F.
    INTERNATIONAL POLYMER PROCESSING, 2011, 26 (04) : 346 - 353
  • [37] Ultrasonic plasticization micro-injection molding technology: characterization of replication fidelity and wettability of high-depth microstructure
    Pan, Lida
    Wu, Wangqing
    Jia, Changyuan
    Liu, Junjie
    JOURNAL OF POLYMER RESEARCH, 2023, 30 (09)
  • [38] Replication of micro-features on PLA: effect of viscosity during injection molding with fast evolution of cavity surface temperature
    Liparoti, Sara
    Speranza, Vito
    Pantani, Roberto
    9TH INTERNATIONAL CONFERENCE ON TIMES OF POLYMERS AND COMPOSITES: FROM AEROSPACE TO NANOTECHNOLOGY, 2018, 1981
  • [39] Ultrasonic plasticization micro-injection molding technology: characterization of replication fidelity and wettability of high-depth microstructure
    Lida Pan
    Wangqing Wu
    Changyuan Jia
    Junjie Liu
    Journal of Polymer Research, 2023, 30 (9)
  • [40] Comparison between Injection Molding (IM) and Injection-Compression Molding (ICM) for Mass Manufacturing of Thermoplastic Microfluidic Devices
    Etxeberria, Leire
    Badiola, Jon Haitz
    Astigarraga, Malen
    Garitaonandia, Felipe
    Zaldua, Ane Miren
    MACROMOLECULAR MATERIALS AND ENGINEERING, 2024, 309 (01)
12345