Analysis of the replication properties of lightguiding plate for micro injection compression molding

被引：0
|
作者：
Shen, Y.K. [1 ]
Chang, H.J. [1 ]
Hung, L.H. [1 ]
机构：
[1] Department of Mechanical Engineering, LungHwa University of Science and Technology, Kueishan, Taoyuan County, 333, 300 Wanshou RD.
来源：
Key Engineering Materials | 2007年 / 329卷
关键词：
Lightguiding plate; Micro injection compression molding; Microstructure; Replication;
D O I：
10.4028/0-87849-416-2.643
中图分类号：
学科分类号：
摘要：
This paper presents the application of microstructure replication of lightguiding plate for micro injection compression molding (MICM). The lightguiding plate is applied on LCD of two inch of digital camera. Its radius of micro-structure is from 100μm to 300μm by linearity expansion. The material of lightguiding plate is PMMA. This paper discusses the replication properties for different process parameters by single-parameter method for micro injection compression molding. The important process parameters of replication properties are the mold temperature, compression distance and melt temperature in micro injection compression molding. The mold temperature is the most significant factor of replication properties of microstructure of lightguiding plate for micro injection compression molding.
引用
收藏
页码：643 / 648
页数：5
相关论文
共 50 条
  • [21] Replication of micro and nano-features on iPP by injection molding with fast cavity surface temperature evolution
    Speranza, Vito
    Liparoti, Sara
    Calaon, Matteo
    Tosello, Guido
    Pantani, Roberto
    Titomanlio, Giuseppe
    MATERIALS & DESIGN, 2017, 133 : 559 - 569
  • [22] Injection molding and injection compression molding of three-beam grating of DVD pickup lens
    Wu, CH
    Chen, WS
    SENSORS AND ACTUATORS A-PHYSICAL, 2006, 125 (02) : 367 - 375
  • [23] Fabrication of Micro-Structured LED Diffusion Plate Using Efficient Micro Injection Molding and Micro-Ground Mold Core
    Lu, Yanjun
    Luo, Wang
    Wu, Xiaoyu
    Xu, Bin
    Wang, Chunjin
    Li, Jiajun
    Li, Liejun
    POLYMERS, 2020, 12 (06)
  • [24] Ultrasound - aided ejection in micro injection molding
    Masato, D.
    Sorgato, M.
    Lucchetta, G.
    PROCEEDINGS OF 21ST INTERNATIONAL ESAFORM CONFERENCE ON MATERIAL FORMING (ESAFORM 2018), 2018, 1960
  • [25] Simulation Approach for Hydrophobicity Replication via Injection Molding
    Baldi-Boleda, Tomas
    Sadeghi, Ehsan
    Colominas, Carles
    Garcia-Granada, Andres
    POLYMERS, 2021, 13 (13)
  • [26] Feedstock development for micro powder injection molding
    L. Merz
    S. Rath
    V. Piotter
    R. Ruprecht
    J. Ritzhaupt-Kleissl
    J. Hausselt
    Microsystem Technologies, 2002, 8 (2) : 129 - 132
  • [27] Mass-producible micro-optical elements by injection compression molding and focused ion beam structured titanium molding tools
    Ristok, Simon
    Roeder, Marcel
    Thiele, Simon
    Hentschel, Mario
    Guenther, Thomas
    Zimmermann, Andre
    Herkommer, Alois M.
    Giessen, Harald
    OPTICS LETTERS, 2020, 45 (05) : 1184 - 1187
  • [28] Analysis for microstructure of microlens arrays on micro-injection molding by numerical simulation
    Shen, Yung-Kang
    Chang, Chih-Yuan
    Shen, Yu-Sheng
    Hsu, Sung-Chih
    Wu, Ming-Wei
    INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER, 2008, 35 (06) : 723 - 727
  • [29] Replication of Micro- and Nanofeatures in Injection Molding of Two PLA Grades with Rapid Surface-Temperature Modulation
    Liparoti, Sara
    Speranza, Vito
    Pantani, Roberto
    MATERIALS, 2018, 11 (08)
  • [30] Densification and mechanical properties of boron carbide with micro-hole array by micro-powder injection molding
    Wang, Chang-rui
    Xiao, Hong
    Shao, Kui-wu
    Lu, Zhen
    Zhang, Kai-feng
    CERAMICS INTERNATIONAL, 2014, 40 (06) : 7915 - 7921
12345